FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why is my Honda Civic 9th Generation (2012-2015) steering wheel making a clicking noise? - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/why is my Honda Civic 9th Generation (2012-2015) steering wheel making a clicking noise?

why is my Honda Civic 9th Generation (2012-2015) steering wheel making a clicking noise?

Honda Civic 9th Generation (2012-2015)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
483 words

Problem Statement

Learn how to diagnose and fix the clicking noise in the steering wheel of your Honda Civic 9th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Steering
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before performing any work.

Symptoms

  • •Clicking noise when turning the steering wheel
  • •Difficulty in steering or stiffness in the steering feel
  • •Vibration in the steering wheel
  • •Loose or wobbly steering wheel
  • •Steering wheel misalignment

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Torque wrench
  • •Screwdriver set
  • •Power steering fluid

Parts Required

  • •Tie rod ends (if faulty)
  • •Ball joints (if faulty)
  • •Steering shaft coupler (if worn)

Additional Information

Affected Component
Steering
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is on a level surface and the ignition is turned off.
  • Disconnect the battery to prevent electrical issues.
2. Inspect and Tighten Steering Components
  • Sub-step 1: Remove the steering column cover by unscrewing the screws.
  • Sub-step 2: Inspect the steering shaft, coupler, and joints for any signs of wear or damage.
  • Sub-step 3: Tighten any loose bolts or nuts found during the inspection.
3. Replace Worn Components
  • Sub-step 1: If any components are found to be damaged (e.g., tie rod ends, ball joints), remove them using a socket set.
  • Sub-step 2: Install new components, ensuring proper alignment and torque to manufacturer specifications (typically around 40-50 ft-lbs for most steering components).
  • Sub-step 3: Reattach any covers or shields that were removed during the inspection.
4. Refill Power Steering Fluid
  • Sub-step 1: Check the power steering fluid reservoir; if low, add the recommended type of power steering fluid (typically Honda PSF or equivalent).
  • Sub-step 2: Start the engine and turn the steering wheel from lock to lock to bleed any air from the system.
  • Sub-step 3: Recheck fluid level and top off as necessary.