why is my Honda Civic 9th Generation (2012-2015) shaking when I brake?

Honda Civic 9th Generation (2012-2015)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

473 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Civic 9th Generation (2012-2015). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery when working on electrical components.
•Ensure the vehicle is securely lifted and supported before working underneath.

Symptoms

•Steering wheel vibrates during braking
•Shaking felt in the car's chassis
•Uneven brake pad wear
•Pulsating brake pedal
•Increased stopping distance

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a run-out gauge.
2
Check brake pad condition for wear and glazing.
3
Examine suspension components (e.g., control arms, tie rods) for play or damage.
4
Verify wheel alignment and tire condition, looking for uneven wear or damage.
5
Check wheel lug nut torque to ensure proper seating of the wheels.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Jack
•Jack stands
•Brake cleaner
•Caliper tool

Parts Required

•Brake pads
•Brake rotors
•Suspension components (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a run-out gauge.
2
Check brake pad condition for wear and glazing.
3
Examine suspension components (e.g., control arms, tie rods) for play or damage.
4
Verify wheel alignment and tire condition, looking for uneven wear or damage.
5
Check wheel lug nut torque to ensure proper seating of the wheels.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Wear safety goggles and gloves.

2. Remove Wheel

Tools Required: Socket set, jack, jack stands
Loosen lug nuts slightly while the vehicle is on the ground.
Raise the vehicle using a jack and secure it with jack stands.
Completely remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Components

Tools Required: Torque wrench, brake cleaner, caliper tool
Inspect the brake rotors for warping:
- If warped beyond manufacturer specifications, replace the rotors.
- Clean the surface of the rotors with brake cleaner before installation.
Inspect brake pads for wear:
- Replace if pads are worn down to the indicator or unevenly worn.
Reinstall or replace caliper components as necessary.

4. Check Suspension Components

Visually inspect control arms, tie rods, and bushings for damage or excessive play.
Replace any worn or damaged parts to ensure proper alignment and suspension function.

5. Reassemble and Torque

Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle from the jack stands and use a torque wrench to tighten lug nuts to the manufacturer-recommended torque specifications.