why is my Honda Civic 9th Generation (2012-2015) rear brakes squeaking

Honda Civic 9th Generation (2012-2015)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

551 words

Problem Statement

Learn how to diagnose and fix squeaking rear brakes on Honda Civic 9th Generation (2012-2015). Step-by-step guide with symptoms, tools, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted and supported before working underneath it.
•Allow brakes to cool before handling brake components to prevent burns.

Symptoms

•Squeaking noise when brakes are applied
•Increased braking distance
•Vibration felt through the brake pedal
•Brake warning light illuminated on the dashboard
•Dust accumulation on the rear wheels

Diagnostic Steps

1
Inspect rear brake pads for wear and thickness using a caliper.
2
Check brake rotors for scoring or grooves that may cause noise.
3
Examine brake calipers for proper operation and ensure they are not sticking.
4
Inspect brake hardware (clips and shims) for damage or misalignment.
5
Check for moisture or debris on brake components that could affect performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Brake cleaner
•Brake grease
•Rotor removal tool

Parts Required

•New brake pads
•New brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect rear brake pads for wear and thickness using a caliper.
2
Check brake rotors for scoring or grooves that may cause noise.
3
Examine brake calipers for proper operation and ensure they are not sticking.
4
Inspect brake hardware (clips and shims) for damage or misalignment.
5
Check for moisture or debris on brake components that could affect performance.

Solution

1. Preparation

Gather all necessary tools and parts.
Safely lift the vehicle using a jack and secure with jack stands.
Remove the rear wheel to access the brake components.

2. Inspect and Replace Brake Pads

Sub-step 1: Remove the caliper bolts using a socket set.
Sub-step 2: Carefully slide the caliper off the brake pads and suspend it without stressing the brake line.
Sub-step 3: Remove the old brake pads from the bracket.
Sub-step 4: Compare the thickness of the old pads with new ones; replace if worn below specifications (usually 3mm).
Sub-step 5: Apply brake grease to the backing of new pads to minimize noise.
Sub-step 6: Reinstall the new brake pads into the bracket.

3. Inspect and Replace Brake Rotors (if necessary)

Sub-step 1: Use a rotor removal tool if rotors do not slide off easily.
Sub-step 2: Inspect the rotors for warping or excessive wear; replace if they are below the minimum thickness specification (usually stamped on the rotor).
Sub-step 3: Clean the rotor surface with brake cleaner before reinstallation.

4. Reassemble Brake Components

Sub-step 1: Reposition the caliper over the new pads.
Sub-step 2: Tighten the caliper bolts to the manufacturer's specified torque (typically 25-35 ft-lbs).
Sub-step 3: Reinstall the wheel and tighten lug nuts to the specified torque (usually 80-100 ft-lbs).

5. Final Checks

Sub-step 1: Pump the brake pedal several times to ensure proper pad seating.
Sub-step 2: Lower the vehicle and perform a test drive to confirm the squeaking noise has been resolved.