why does my Honda Civic 9th Generation (2012-2015) vibrate at high speeds?

Honda Civic 9th Generation (2012-2015)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

544 words

Problem Statement

Learn how to diagnose and fix vibrations at high speeds in Honda Civic 9th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted before working underneath it.
•Disconnect the battery before working on electrical components.

Symptoms

•Vibration felt through the steering wheel and/or chassis
•Increased noise levels at high speeds
•Vehicle pulling to one side during high-speed driving
•Uneven tire wear
•Steering wheel shakes at specific speeds

Diagnostic Steps

1
Inspect tire condition and pressure; check for uneven wear or damage.
2
Perform a wheel balance check; ensure all wheels are properly balanced.
3
Check for bent or damaged wheels by visually inspecting and using a runout gauge.
4
Inspect suspension components such as tie rods, ball joints, and bushings for wear or damage.
5
Examine drivetrain components, including axles and CV joints, for any signs of issues.
6
Test the alignment settings to ensure they are within manufacturer specifications.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack
•Jack stands
•Lug wrench
•Wheel balancer
•Socket set
•Torque wrench
•Alignment rack

Parts Required

•New tires (if necessary)
•Suspension components (if damaged)
•Balance weights for wheels

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition and pressure; check for uneven wear or damage.
2
Perform a wheel balance check; ensure all wheels are properly balanced.
3
Check for bent or damaged wheels by visually inspecting and using a runout gauge.
4
Inspect suspension components such as tie rods, ball joints, and bushings for wear or damage.
5
Examine drivetrain components, including axles and CV joints, for any signs of issues.
6
Test the alignment settings to ensure they are within manufacturer specifications.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is on a flat surface and secure it with wheel chocks.
Disconnect the battery if working on any electrical components.

2. Inspect and Replace Tires

Tools Required: Tire pressure gauge, jack, jack stands, lug wrench.
Check tire pressure; inflate to the recommended level if low.
Inspect tires for uneven wear or damage; replace if necessary.
If replacing, ensure all four tires are of the same type and tread pattern.

3. Wheel Balancing

Tools Required: Wheel balancer.
Remove the wheel assembly from the vehicle using a lug wrench.
Mount the wheel on the wheel balancer and follow the manufacturer’s instructions to balance it.
Reinstall the wheel and torque the lug nuts to the manufacturer’s specifications.

4. Inspect Suspension Components

Tools Required: Socket set, torque wrench.
Visually inspect suspension components for wear or damage.
If any components are worn (e.g., tie rods, ball joints), replace them.
Reassemble and torque all fasteners to the manufacturer’s specifications.

5. Check Drivetrain Components

Tools Required: Socket set, inspection tools.
Inspect axles and CV joints for any signs of damage or excessive play.
Replace any damaged components as needed, ensuring proper installation.

6. Perform Alignment

Tools Required: Alignment rack.
After replacing any suspension parts, take the vehicle to an alignment shop.
Ensure alignment is adjusted according to manufacturer specifications.