why does my Honda Civic 9th Generation (2012-2015) shake when I accelerate

Honda Civic 9th Generation (2012-2015)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

518 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Civic 9th Generation (2012-2015). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Use caution when lifting the engine to avoid injury.

Symptoms

•Shaking or vibrations felt in the steering wheel or seat during acceleration
•Increased noise from the engine or transmission
•Difficulty maintaining speed or a noticeable loss of power
•Vibrations that may lessen or disappear at constant speed
•Potential check engine light illuminated

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for any engine-related issues.
2
Inspect the tires for uneven wear or damage, and verify proper inflation.
3
Check the engine and transmission mounts for signs of wear or damage.
4
Examine the driveshaft and CV joints for any signs of wear or looseness.
5
Test the alignment and balance of the wheels.
6
Inspect the suspension components for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Floor jack and jack stands
•Screwdrivers

Parts Required

•Engine mounts
•Transmission mounts
•Driveshaft or CV joints (if needed)
•Tires (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for any engine-related issues.
2
Inspect the tires for uneven wear or damage, and verify proper inflation.
3
Check the engine and transmission mounts for signs of wear or damage.
4
Examine the driveshaft and CV joints for any signs of wear or looseness.
5
Test the alignment and balance of the wheels.
6
Inspect the suspension components for wear or damage.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the engine is off.
Gather tools and parts needed for the repair.
Disconnect the battery to prevent electrical shorts.

2. Inspect and Replace Engine and Transmission Mounts

Locate the mounts: Identify the engine and transmission mounts that may need inspection.
Remove the old mounts:
- Use a socket set to remove the bolts securing the mounts to the engine and chassis.
- Carefully lift the engine slightly (using a jack with a wooden block) to relieve tension on the mounts.
Install new mounts:
- Position the new mounts in place.
- Torque the bolts to the manufacturer's specifications (typically between 35-50 lb-ft, check service manual for exact values).

3. Inspect Driveshaft and CV Joints

Visual inspection: Look for any cracks or tears in the CV boots.
Remove the driveshaft:
- Use a socket set to remove bolts connecting the driveshaft to the transmission and wheels.
Reinstall or replace:
- If damaged, replace the driveshaft or CV joints, ensuring proper alignment during reinstallation.

4. Tire and Wheel Inspection

Check tire condition:
- Look for uneven wear or bulges on the tires.
- Replace tires if necessary.
Wheel balancing:
- Have the wheels balanced at a tire shop to ensure they are properly aligned.