FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda Civic 9th Generation (2012-2015) idle rough when in gear - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/why does my Honda Civic 9th Generation (2012-2015) idle rough when in gear

why does my Honda Civic 9th Generation (2012-2015) idle rough when in gear

Honda Civic 9th Generation (2012-2015)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
514 words

Problem Statement

Learn how to diagnose and fix rough idle issues in Honda Civic 9th Generation (2012-2015). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening any components near the engine.

Symptoms

  • •Rough idle when the vehicle is in gear
  • •Engine stalling at low speeds
  • •Decreased fuel economy
  • •Vibrations felt in the cabin
  • •Check engine light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Throttle body cleaner
  • •Soft brush
  • •Line wrench
  • •Torque wrench

Parts Required

  • •Spark plugs
  • •Fuel filter
  • •Engine mounts (if necessary)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts.
  • Disconnect the battery to prevent electrical shorts.
  • Allow the engine to cool before starting work.
2. Clean the Throttle Body
  • Remove the air intake duct connected to the throttle body.
  • Use throttle body cleaner and a soft brush to clean the throttle plate and surrounding areas.
  • Reattach the air intake duct securely.
3. Replace Spark Plugs
  • Remove the ignition coil cover to access the spark plugs.
  • Disconnect the electrical connectors from the ignition coils.
  • Remove the ignition coils using a socket wrench.
  • Replace spark plugs with manufacturer-recommended specifications (e.g., NGK or Denso).
  • Reinstall ignition coils and reconnect electrical connectors.
4. Check and Replace Fuel Filter
  • Locate the fuel filter; refer to the vehicle’s service manual for specific location.
  • Depressurize the fuel system by removing the fuel pump relay and starting the engine until it stalls.
  • Disconnect the fuel lines from the fuel filter using a line wrench.
  • Replace the old filter with a new one, ensuring the correct orientation.
  • Reconnect the fuel lines and reinstall the fuel pump relay.
5. Inspect Engine Mounts
  • Visually inspect engine mounts for cracks or excessive wear.
  • If defective, remove the bolts securing the engine mount to the engine and subframe using a socket set.
  • Replace with new engine mounts and re-torque to manufacturer specifications.