FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic transmission slips when shifting what should I do - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/my Honda Civic transmission slips when shifting what should I do

my Honda Civic transmission slips when shifting what should I do

Honda Civic 9th Generation (2012-2015)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
539 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping issues in Honda Civic. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before working to prevent burns.

Symptoms

  • •Transmission slips during acceleration
  • •Delayed or harsh shifting between gears
  • •Check engine light illuminated
  • •Fluid leakage under the vehicle
  • •Unusual noises (grinding or whining) when shifting
  • •Increased engine RPM without corresponding speed increase

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Funnel
  • •Wrench set

Parts Required

  • •Transmission fluid (as specified in the owner's manual)
  • •Transmission filter kit (if applicable)
  • •Transmission pan gasket (if applicable)

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Park the vehicle on a level surface and engage the parking brake.
  • Disconnect the negative battery terminal to ensure safety while working on electrical components.
2. Check and Replace Transmission Fluid
  • Tools Required: Socket set, funnel, transmission fluid
  • Sub-steps:
    1. Locate the transmission dipstick and remove it.
    2. Check the fluid level; if low, add the appropriate type of transmission fluid (refer to the owner's manual).
    3. If the fluid is dirty or burnt, drain the old fluid using a drain pan.
    4. Replace the transmission fluid with new fluid, ensuring it meets Honda specifications.
3. Replace Transmission Filter (if applicable)
  • Tools Required: Socket set, transmission filter kit
  • Sub-steps:
    1. Remove the transmission pan (if applicable) by unscrewing the bolts with a socket wrench.
    2. Carefully lower the pan and remove the old filter.
    3. Install the new filter, ensuring it is seated properly.
    4. Clean the transmission pan and install a new gasket before reattaching it.
4. Inspect and Adjust Transmission Linkage
  • Tools Required: Wrench set
  • Sub-steps:
    1. Locate the transmission linkage under the vehicle.
    2. Inspect the linkage for wear or damage.
    3. Adjust the linkage as necessary for proper alignment and function.
5. Reconnect Battery and Test Drive
  • Reconnect the negative battery terminal.
  • Start the vehicle and perform a test drive to check for slipping and ensure proper shifting.