my Honda Civic 9th Generation (2012-2015) steering wheel shakes when braking what to do

Honda Civic 9th Generation (2012-2015)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

485 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix steering wheel shaking when braking in Honda Civic 2012-2015. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always allow the brakes to cool before working on them.
•Ensure the vehicle is securely lifted before working underneath it.

Symptoms

•Steering wheel vibrates during braking
•Increased stopping distance
•Brake pedal pulsation
•Uneven tire wear
•Possible noise from brakes when applied

Diagnostic Steps

1
Inspect tire condition and alignment visually.
2
Check brake rotor thickness using a micrometer.
3
Perform a brake pad inspection for wear and unevenness.
4
Check wheel lug nut torque to ensure they are properly tightened.
5
Scan for any error codes related to the ABS system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Jack and jack stands
•Socket set
•Torque wrench
•Micrometer

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and secure it with wheel chocks.
Disconnect the negative battery terminal to avoid electrical issues.

2. Inspect and Replace Brake Rotors

Sub-steps:
1. Lift the vehicle using a jack and secure it with jack stands.
2. Remove the front wheels using a socket set.
3. Remove the brake caliper by unbolting it; secure it with a wire to prevent hanging by the brake line.
4. Remove the brake pads from the caliper bracket.
5. Inspect the brake rotors for warping (use a dial indicator if necessary).
6. If warped beyond specifications (typically more than 0.002 inches), replace the rotors.
7. Install new rotors by reversing the removal process, ensuring proper torque (typically 70-90 ft-lbs) for the caliper bolts.

3. Inspect and Replace Brake Pads

Sub-steps:
1. While the caliper is removed, inspect the brake pads for even wear.
2. If pads are worn unevenly or below specification (less than 3mm), replace them.
3. Apply brake grease to the back of the new pads to prevent noise.
4. Reinstall the pads into the caliper bracket.

4. Perform Wheel Alignment

Sub-steps:
1. After reassembling the brake components, reinstall the wheels.
2. Tighten the lug nuts to the recommended torque (typically 80-100 ft-lbs).
3. Take the vehicle to a professional alignment shop for a 4-wheel alignment to ensure proper handling and even tire wear.