my Honda Civic 9th Generation (2012-2015) loses power when I brake what's happening

Honda Civic 9th Generation (2012-2015)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

584 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix power loss during braking in 2012-2015 Honda Civic. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before inspecting the intake system or engine components.

Symptoms

•Check engine light illuminated
•Engine stalling or hesitation when braking
•Unresponsive accelerator pedal
•Rough idle during braking
•Increased fuel consumption
•Unusual noises from the engine compartment

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect the brake system for any sticking components or issues with the brake booster.
3
Check the throttle position sensor (TPS) for proper function using a multimeter.
4
Test the vacuum lines for leaks that may affect the brake booster operation and engine performance.
5
Inspect the air intake system for blockages or leaks that could impact engine performance.
6
Verify fuel pressure to ensure the fuel system is delivering adequate pressure during braking.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Brake fluid tester
•Fuel pressure gauge
•Throttle body cleaner

Parts Required

•Throttle position sensor (if faulty)
•Vacuum lines (if damaged)
•Air filter (if clogged)
•Brake pads/rotors (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect the brake system for any sticking components or issues with the brake booster.
3
Check the throttle position sensor (TPS) for proper function using a multimeter.
4
Test the vacuum lines for leaks that may affect the brake booster operation and engine performance.
5
Inspect the air intake system for blockages or leaks that could impact engine performance.
6
Verify fuel pressure to ensure the fuel system is delivering adequate pressure during braking.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent electrical shorts.

2. Inspect Brake System

Tools Required: Brake fluid tester, socket set.
Remove the wheel to access the brake components.
Inspect brake pads and rotors for wear.
Check for any sticking calipers or debris that may cause drag.
Ensure the brake fluid level is adequate and check for leaks in the brake lines.

3. Check Throttle Position Sensor

Tools Required: Multimeter, socket set.
Locate the TPS on the throttle body.
Disconnect the electrical connector and use a multimeter to measure the resistance.
Compare the readings with the specifications in the service manual; replace the TPS if readings are out of range.

4. Inspect Vacuum Lines

Tools Required: Visual inspection.
Visually inspect all vacuum lines connected to the intake manifold and brake booster for cracks or disconnections.
Replace any damaged vacuum lines.

5. Inspect Air Intake System

Tools Required: Socket set, screwdriver.
Remove the air intake duct to inspect the air filter and throttle body.
Clean the throttle body with throttle body cleaner if there is carbon buildup.
Replace the air filter if it is dirty or clogged.

6. Verify Fuel Pressure

Tools Required: Fuel pressure gauge.
Connect the fuel pressure gauge to the fuel rail.
Start the engine and monitor the pressure; compare it to the manufacturer’s specifications.
Replace the fuel pump or filter if pressure is below specifications.