my Honda Civic 9th Generation (2012-2015) is shaking while braking what's wrong

Honda Civic 9th Generation (2012-2015)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

488 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Civic 2012-2015. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported with jack stands before working underneath.
•Wear safety goggles and gloves when handling brake components and cleaning agents.

Symptoms

•Steering wheel shakes during braking
•Pulsation felt in the brake pedal
•Uneven brake wear observed
•Increased stopping distance
•Possible noise (grinding or squeaking) from the brakes

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear.
2
Check brake pads for wear and proper installation.
3
Examine wheel alignment and balance.
4
Inspect suspension components for wear or damage.
5
Perform a test drive to confirm the symptoms and their consistency.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Hydraulic jack
•Jack stands
•Socket set
•Torque wrench
•Dial indicator (for rotor inspection)
•Brake cleaner

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a level surface and secured with wheel chocks.
Disconnect the battery to prevent electrical shorts.

2. Lift Vehicle

Use a hydraulic jack to lift the front of the vehicle.
Secure with jack stands to ensure stability.

3. Remove Wheel

Use a socket set to remove lug nuts.
Carefully take off the wheel to access the brake components.

4. Inspect and Replace Brake Rotors

Inspection:
- Check rotors for warping using a dial indicator or by visually inspecting for uneven surfaces.
Replacement:
- If warped, remove the caliper bolts with a socket and slide off the caliper.
- Remove the rotor by unscrewing any retaining screws and pulling it off the hub.
- Install new rotors, ensuring they are properly seated and any protective coating is removed.
- Torque rotor retaining screws to manufacturer specifications.

5. Inspect and Replace Brake Pads

Check the condition of the brake pads.
If worn, remove the caliper bracket bolts and slide the caliper and bracket off the pads.
Replace the old pads with new ones, ensuring proper orientation.
Reinstall the caliper over the new pads and torque bolts to manufacturer specifications.

6. Reassemble and Lower Vehicle

Reattach the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque lug nuts to the manufacturer’s specifications.

Tools Required:

Hydraulic jack
Jack stands
Socket set
Torque wrench
Dial indicator (for rotor inspection)
Brake cleaner

Parts Required:

Brake rotors (if warped)
Brake pads (if worn)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Always ensure the vehicle is securely supported with jack stands before working underneath.
Wear safety goggles and gloves when handling brake components and cleaning agents.