my Honda Civic 9th Generation (2012-2015) has excessive oil consumption what's wrong

Honda Civic 9th Generation (2012-2015)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

579 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix excessive oil consumption in Honda Civic 9th Generation. Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the engine to cool before draining oil or performing any repairs.

Symptoms

•Check engine light illuminated
•Blue smoke from the exhaust
•Engine oil level dropping rapidly
•Oil spots or leaks under the vehicle
•Poor engine performance
•Unusual engine noise (ticking or knocking)

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any related issues.
2
Inspect the engine oil level and condition, noting color and consistency.
3
Perform a visual inspection for oil leaks around the engine, gasket seals, and oil pan.
4
Check the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.
5
Conduct a compression test on the engine cylinders to assess engine health.
6
Inspect spark plugs for oil fouling, which can indicate oil entering the combustion chamber.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Oil drain pan
•Compression tester
•Oil filter wrench

Parts Required

•New PCV valve
•Engine gaskets (if needed)
•Engine oil (meeting manufacturer's specifications)
•Oil filter

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any related issues.
2
Inspect the engine oil level and condition, noting color and consistency.
3
Perform a visual inspection for oil leaks around the engine, gasket seals, and oil pan.
4
Check the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.
5
Conduct a compression test on the engine cylinders to assess engine health.
6
Inspect spark plugs for oil fouling, which can indicate oil entering the combustion chamber.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent any electrical issues during repairs.

2. Inspect and Replace the PCV Valve

Locate the PCV valve, typically found on the valve cover.
Remove the PCV valve from its housing.
Inspect the valve for blockages or damage; if faulty, replace it with a new part.
Reinstall the new PCV valve, ensuring a snug fit.

3. Repair or Replace Engine Gaskets

Identify any gaskets that may be leaking (valve cover gasket, oil pan gasket).
Remove any components obstructing access to the gaskets (e.g., intake manifold if necessary).
Remove and clean the old gasket material from the surfaces.
Apply a new gasket or RTV sealant as specified by the manufacturer.
Reinstall components in reverse order and torque to manufacturer specifications.

4. Perform Engine Compression Test

Remove spark plugs to allow access to the cylinders.
Use a compression tester to check the pressure in each cylinder.
Compare results to the manufacturer’s specifications; if readings are low, further investigation may be needed (e.g., valve seals or piston rings).

5. Replace Oil and Filter

Drain the existing engine oil using an oil drain pan.
Replace the oil filter with a new one.
Refill the engine with the manufacturer-recommended oil type and quantity.
Start the engine and let it idle for a few minutes, checking for leaks.