FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 9th Generation (2012-2015) has a check engine light and runs rough, what to do? - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/my Honda Civic 9th Generation (2012-2015) has a check engine light and runs rough, what to do?

my Honda Civic 9th Generation (2012-2015) has a check engine light and runs rough, what to do?

Honda Civic 9th Generation (2012-2015)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
502 words

Problem Statement

Learn how to diagnose and fix check engine light and rough running issues in Honda Civic 9th Generation (2012-2015). Step-by-step guide included.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before inspecting or servicing components.

Symptoms

  • •Check engine light illuminated
  • •Engine runs rough or has a rough idle
  • •Potential loss of power during acceleration
  • •Decreased fuel efficiency
  • •Unusual exhaust emissions or smells

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Spark plug socket
  • •Fuel pressure gauge
  • •Screwdrivers

Parts Required

  • •New spark plugs
  • •Fuel filter (if needed)
  • •Possible ignition coils (if faulty)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to ensure safety.
2. Scan for Codes
  • Use an OBD-II scanner to retrieve any stored error codes.
  • Document the codes for further analysis.
3. Inspect and Replace Spark Plugs
  • Remove the engine cover if applicable.
  • Using a socket set, remove the spark plug wires or ignition coils.
  • Use a spark plug socket to remove the spark plugs.
  • Inspect spark plugs for wear; replace if necessary.
  • Install new spark plugs, ensuring they are gapped correctly (typically 0.044 inches for Honda).
  • Reinstall ignition coils or spark plug wires.
4. Check Fuel Pressure
  • Connect a fuel pressure gauge to the fuel rail.
  • Turn the ignition key to the "ON" position (do not start) and check the pressure reading.
  • If the pressure is below specifications (usually around 40-50 PSI), inspect the fuel pump and filter.
  • Replace the fuel filter if clogged, and consider replacing the fuel pump if it is faulty.
5. Inspect Air Intake System
  • Remove the air intake duct to access the air filter.
  • Check the air filter for dirt and replace if necessary.
  • Inspect the intake manifold and throttle body for carbon buildup; clean if needed.
6. Reconnect Battery and Clear Codes
  • Reconnect the negative battery terminal.
  • Clear the error codes using the OBD-II scanner.
  • Start the engine and check for improvement.