FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 9th Generation (2012-2015) AC is blowing hot air what's wrong - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/my Honda Civic 9th Generation (2012-2015) AC is blowing hot air what's wrong

my Honda Civic 9th Generation (2012-2015) AC is blowing hot air what's wrong

Honda Civic 9th Generation (2012-2015)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
542 words

Problem Statement

Learn how to diagnose and fix AC blowing hot air in Honda Civic 9th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
HVAC
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow the engine to cool before opening the hood to prevent burns.

Symptoms

  • •AC compressor not engaging
  • •Unusual noises from the AC system (e.g., hissing or clicking)
  • •Warm air blowing from the vents
  • •Poor airflow from the AC vents
  • •AC refrigerant level is low
  • •AC control panel lights functioning improperly

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Refrigerant gauge set
  • •Screwdrivers (flathead and Phillips)

Parts Required

  • •AC fuse/relay (if needed)
  • •Refrigerant (R-134a)
  • •Cabin air filter (if needed)

Additional Information

Affected Component
HVAC
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to ensure safety.
2. Check and Replace AC Fuse/Relay
  • Locate the fuse box (usually under the dashboard or hood).
  • Check the AC fuse and relay for continuity using a multimeter.
  • If faulty, replace with the same amperage fuse or relay.
3. Recharge AC System
  • Connect a refrigerant gauge set to the low-pressure service port.
  • If the refrigerant level is low, follow these sub-steps:
    • Start the engine and turn on the AC to the maximum setting.
    • Slowly add refrigerant until the pressure reaches the manufacturer's specifications (typically around 30-40 psi on the low side).
    • Monitor the gauge to avoid overcharging.
4. Inspect and Replace the Cabin Air Filter
  • Open the glove compartment and remove it to access the cabin air filter cover.
  • Remove the cover and take out the old filter.
  • Clean the housing and install a new cabin air filter, ensuring proper orientation.
5. Inspect AC Compressor Functionality
  • Start the vehicle and observe the AC compressor to see if it engages.
  • If the compressor does not engage, check the electrical connections and the clutch for signs of wear.
  • If faulty, replace the compressor.