FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to troubleshoot Honda Civic 9th Generation (2012-2015) power window not working - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to troubleshoot Honda Civic 9th Generation (2012-2015) power window not working

how to troubleshoot Honda Civic 9th Generation (2012-2015) power window not working

Honda Civic 9th Generation (2012-2015)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
555 words

Problem Statement

Learn how to troubleshoot and fix power window issues in Honda Civic 9th Generation (2012-2015). Step-by-step guide with diagnostic steps and solutions.

Affected Component
Electrical
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on the electrical system to avoid short circuits.

Symptoms

  • •Power window switch does not illuminate when pressed
  • •Window does not move up or down
  • •Audible clicking sound when switch is activated
  • •Power window works intermittently
  • •Other windows are functioning normally

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Socket set
  • •Flathead screwdriver
  • •Phillips screwdriver
  • •Wire connectors

Parts Required

  • •Power window fuse (if blown)
  • •Power window switch (if faulty)
  • •Window motor (if faulty)
  • •Window regulator (if damaged)

Additional Information

Affected Component
Electrical
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: multimeter, socket set, flathead screwdriver, Phillips screwdriver, and wire connectors.
  • Ensure the vehicle is turned off and the keys are removed from the ignition.
2. Inspect the Fuse
  • Locate the fuse box (usually under the dashboard or hood).
  • Remove the power window fuse using a fuse puller.
  • Check the fuse visually; replace it if it is blown (usually a 20A fuse).
  • Reinstall the fuse and test the power window operation.
3. Test the Power Window Switch
  • Remove the door panel using a flathead screwdriver and Phillips screwdriver.
  • Disconnect the power window switch connector.
  • Using a multimeter, set it to continuity mode.
  • Test the switch terminals by pressing the switch; a beep indicates continuity.
  • If there's no continuity, replace the switch.
4. Check Wiring Harness and Connections
  • Visually inspect the wiring harness for frayed wires or loose connections.
  • If damaged, repair or replace the affected wires using wire connectors.
  • Ensure all connections are secure.
5. Test the Window Motor
  • Disconnect the window motor connector.
  • Using jumper wires, connect the motor directly to the battery (positive to positive, negative to negative).
  • If the motor operates, it is functioning correctly; if not, it may need replacement.
6. Inspect the Window Regulator
  • If the motor is functional, check the window regulator.
  • Manually move the window glass to see if it is stuck or obstructed.
  • If necessary, remove the regulator and inspect for damage; replace if damaged or if the mechanism is faulty.