how to reset the TPMS light on my Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

427 words

Problem Statement

Learn how to reset the TPMS light on your 2012-2015 Honda Civic. Step-by-step guide with diagnostic steps, tools required, and safety tips.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always check tire pressures when tires are cold for accurate readings.
•Ensure the vehicle is on a flat surface when checking tire pressures.

Symptoms

•TPMS warning light illuminated on the dashboard
•Incorrect tire pressure reading displayed
•Warning message indicating low tire pressure
•Fluctuating tire pressure readings after adjustments
•Possible rough ride due to under-inflated tires

Diagnostic Steps

1
Check tire pressures on all four tires with a reliable tire pressure gauge.
2
Inspect tires for visible damage, leaks, or punctures.
3
Verify the spare tire, if applicable, has the correct pressure and TPMS sensor.
4
Use an OBD-II scanner to check for any related diagnostic trouble codes (DTCs).
5
Drive the vehicle for a short distance (about 10 minutes) to allow the TPMS to self-calibrate.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•TPMS reset tool
•Tire pressure gauge
•OBD-II scanner

Parts Required

•None necessary for resetting; however, consider replacing faulty sensors if issues persist.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check tire pressures on all four tires with a reliable tire pressure gauge.
2
Inspect tires for visible damage, leaks, or punctures.
3
Verify the spare tire, if applicable, has the correct pressure and TPMS sensor.
4
Use an OBD-II scanner to check for any related diagnostic trouble codes (DTCs).
5
Drive the vehicle for a short distance (about 10 minutes) to allow the TPMS to self-calibrate.

Solution

1. Preparation

Gather necessary tools: TPMS reset tool (if available), tire pressure gauge, and OBD-II scanner (if needed).
Ensure all tires are inflated to the recommended pressure as specified on the driver’s door jamb label.

2. Resetting the TPMS

Locate the TPMS Reset Button
- Typically found beneath the steering column or to the right of the steering wheel.
- Ensure the vehicle is turned on, but the engine is off.
Press and Hold the TPMS Reset Button
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
Start the Engine
- Turn the ignition to the "ON" position without starting the engine.
- Wait for a few minutes for the system to recognize the reset.
Drive the Vehicle
- Drive the vehicle for at least 10-15 minutes at speeds above 30 mph to allow the system to recalibrate.