how to reset the oil life light on my Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

393 words

Problem Statement

Learn how to reset the oil life light on your Honda Civic (2012-2015) after an oil change. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and the engine is off while performing the reset.

Symptoms

•Oil life indicator remains illuminated on the dashboard
•Potential confusion regarding the next oil change interval
•Engine oil change has been performed but the light is not resetting

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Turn the ignition to the 'ON' position without starting the engine.
3
Navigate to the 'Oil Life' display on the multi-information display (MID) by using the steering wheel controls.
4
Press the 'Enter' button (or equivalent) to access the oil life reset menu.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this task.

Parts Required

•None specifically required for this task.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Turn the ignition to the 'ON' position without starting the engine.
3
Navigate to the 'Oil Life' display on the multi-information display (MID) by using the steering wheel controls.
4
Press the 'Enter' button (or equivalent) to access the oil life reset menu.

Solution

1. Preparation

Ensure the vehicle is in "Park" (for automatic) or neutral (for manual).
Confirm that the ignition is in the "ON" position.

Use the steering wheel control buttons to scroll through the display until you reach the "Oil Life" option.
Press and hold the "Enter" button for a few seconds until the oil life percentage begins to blink.

3. Reset the Oil Life

While the oil life percentage is blinking, press and hold the "Enter" button again until you see the message "Oil Life Reset" or the percentage resets to 100%.
Release the button once the reset is confirmed on the display.

4. Verify the Reset

Turn the ignition off and then back to the "ON" position to check that the oil life indicator shows 100%.