FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil life indicator on Honda Civic 9th Generation (2012-2015) - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to reset the oil life indicator on Honda Civic 9th Generation (2012-2015)

how to reset the oil life indicator on Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes
less than 10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
345 words

Problem Statement

Learn how to reset the oil life indicator on Honda Civic 9th Generation (2012-2015) after an oil change. Step-by-step guide for accurate maintenance tracking.

Affected Component
Electrical
Estimated Time
less than 10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' (or 'Neutral' for manual transmissions) before performing the reset.

Symptoms

  • •Oil life indicator showing a percentage (e.g., 15% or 0%)
  • •Maintenance required light illuminated
  • •Engine oil change has been performed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Ignition key
  • •Key fob

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
less than 10 minutes
Difficulty
easy
Severity
low
Tools Required
2 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface.
  • Have the key fob or ignition key ready.
2. Accessing the Oil Life Indicator
  • Insert the key into the ignition and turn it to the "ON" position (do not start the engine).
3. Resetting the Oil Life Indicator
  • Press the "SELECT/RESET" button located on the instrument panel until the oil life indicator is displayed.
  • Press and hold the "SELECT/RESET" button for approximately 10 seconds until the oil life indicator begins to blink.
  • Release the button and then press it again to confirm the reset action. The display should change to 100% oil life.
4. Final Verification
  • Turn off the ignition and then turn it back on to check the oil life indicator reflects 100%.