FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Honda Civic 9th Generation (2012-2015) - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to reset the maintenance light on my Honda Civic 9th Generation (2012-2015)

how to reset the maintenance light on my Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
311 words

Problem Statement

Learn how to reset the maintenance light on your Honda Civic 9th Generation (2012-2015) with this step-by-step guide. Quick and easy instructions.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and on a level surface before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder message displayed on the instrument cluster

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None needed

Parts Required

  • •None needed

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely and the ignition is turned off.
  • Gather necessary tools: none required for this procedure.
2. Resetting the Maintenance Light
  1. Turn Off Ignition: Ensure the ignition switch is turned to the "OFF" position.
  2. Press and Hold the Button: Locate the "Select/Reset" button on the instrument cluster and press it.
  3. Turn Ignition On: While holding the "Select/Reset" button, turn the ignition switch to the "ON" position (do not start the engine).
  4. Continue Holding: Keep holding the "Select/Reset" button until the maintenance light resets (approximately 10 seconds).
  5. Release the Button: Once the light resets, release the "Select/Reset" button.
  6. Turn Off Ignition Again: Turn the ignition switch back to the "OFF" position.