FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Honda Civic 9th Generation (2012-2015) - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to reset the maintenance light on my Honda Civic 9th Generation (2012-2015)

how to reset the maintenance light on my Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
359 words

Problem Statement

Learn how to reset the maintenance light on your Honda Civic 9th Generation (2012-2015) with this step-by-step guide. Quick and easy instructions.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park (or neutral) and on a flat surface when performing this reset.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •Message indicating 'Maintenance Due' or similar appears
  • •Engine oil change or service reminder notification is displayed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this process.
  • Ensure the vehicle is in a safe location with the engine off.
2. Resetting the Maintenance Light
  1. Turn Off Ignition: Ensure the ignition is completely turned off.
  2. Press and Hold SELECT/RESET: Locate the SELECT/RESET knob on the instrument panel and press it down.
  3. Ignition On: Turn the ignition key to the ON position (do not start the engine) while still holding the SELECT/RESET knob.
  4. Watch for Blinking Light: Hold the knob until the maintenance light starts to blink, then release the knob.
  5. Confirm Reset: Turn the ignition OFF and then back ON to check if the maintenance light is no longer illuminated.