FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
366 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) with this step-by-step guide. Quick and easy instructions.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park or neutral with the parking brake engaged before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or maintenance appearing on the display
  • •Engine oil or filter replaced recently

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this procedure.
  • Ensure the vehicle is in a safe and stationary position.
2. Resetting the Maintenance Light
  1. Turn Off Ignition: Ensure the ignition is completely OFF.
  2. Press and Hold Button: Press and hold the "Select/Reset" button located on the instrument panel.
  3. Turn On Ignition: While holding the button, turn the ignition key to the "ON" position (do not start the engine).
  4. Wait for Reset: Continue to hold the "Select/Reset" button until the maintenance light flashes and then goes out (this usually takes about 10 seconds).
  5. Release the Button: Once the light has reset, release the "Select/Reset" button.
  6. Turn Off Ignition: Turn the ignition back to the OFF position.
  7. Start the Engine: Start the engine to confirm that the maintenance light is no longer illuminated.