how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

357 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe environment while performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or service due appearing
•No other engine issues present

Diagnostic Steps

1
Ensure the vehicle is parked in a safe location with the engine off.
2
Insert the key into the ignition without starting the engine.
3
Press the gas pedal three times within five seconds.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Observe the maintenance light; it should blink and then turn off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Owner's manual (for reference if needed)

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked in a safe location with the engine off.
2
Insert the key into the ignition without starting the engine.
3
Press the gas pedal three times within five seconds.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Observe the maintenance light; it should blink and then turn off.

Solution

1. Preparation

Gather necessary tools:
- Ignition key
- Owner's manual (for reference if needed)

2. Resetting the Maintenance Light

Turn Off the Engine
- Ensure the engine is completely off before starting the reset process.
Insert the Key
- Place the key in the ignition without turning it to the "ON" position.
Press the Gas Pedal
- Firmly press the gas pedal down three times within five seconds. This step signals the system for a reset.
Turn Ignition On
- Turn the ignition key to the "ON" position (do not start the engine).
Observe Dashboard
- Watch the maintenance light; it should blink and then turn off after a few seconds, indicating a successful reset.

3. Confirm Reset

Turn the ignition back off and then start the engine to ensure the maintenance light is no longer illuminated.