how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

380 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) with this step-by-step guide. Quick and easy procedure.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before starting the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Routine maintenance performed (e.g., oil change, filter replacement)

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Check that all maintenance items (oil change, filter, etc.) have been completed.
3
Verify the vehicle's odometer reading to confirm it is ready for a reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: none required for this procedure.
Ensure the vehicle is parked on a level surface with the engine off.

2. Turn the Ignition On

Insert the key into the ignition or press the start button to turn the vehicle to the "ON" position (do not start the engine).
Wait for the dashboard lights to illuminate.

3. Access the Maintenance Light Reset Procedure

Locate the trip meter button on the dashboard, usually found near the speedometer.
Press and hold the trip meter button until the display shows "Odometer" (this may take a few seconds).

4. Reset the Maintenance Light

While still holding the trip meter button, turn the ignition switch to the "OFF" position.
Continue to hold the trip meter button.
Turn the ignition switch back to the "ON" position while keeping the trip meter button pressed.
Release the trip meter button after the maintenance light blinks and goes out. This indicates that the reset was successful.