how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)?

Honda Civic 9th Generation (2012-2015)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

371 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset procedure.

Symptoms

•Maintenance light is illuminated on the dashboard
•No other warning lights are active
•Vehicle operates normally aside from the maintenance reminder

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Ensure the odometer is displayed (not the trip meter).
3
Turn off the ignition completely.
4
Press and hold the 'Select/Reset' button on the dashboard.
5
While holding the button, turn the ignition back to the 'ON' position.
6
Continue to hold the 'Select/Reset' button until the maintenance light begins to blink and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Ensure the odometer is displayed (not the trip meter).
3
Turn off the ignition completely.
4
Press and hold the 'Select/Reset' button on the dashboard.
5
While holding the button, turn the ignition back to the 'ON' position.
6
Continue to hold the 'Select/Reset' button until the maintenance light begins to blink and then turns off.

Solution

1. Preparation

Ensure that the vehicle is parked with the ignition off.
Have the vehicle in a well-lit area for visibility.

2. Access the Ignition

Insert the key into the ignition.
Turn the key to the "ON" position, which powers the dashboard without starting the engine.

3. Reset the Maintenance Light

Confirm that the odometer is displayed. If not, press the "Select/Reset" button until it shows the odometer.
Turn the ignition back to the "OFF" position.
Press and hold the "Select/Reset" button on the dashboard.
While holding the button, turn the ignition back to the "ON" position.
Keep holding the "Select/Reset" button until the maintenance light blinks and then turns off, indicating a successful reset.

4. Finalize the Process

Release the "Select/Reset" button.
Turn the ignition off and then start the vehicle to confirm the maintenance light is no longer illuminated.