how to reset the check engine light on Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

377 words

Problem Statement

Learn how to reset the check engine light on Honda Civic 9th Generation (2012-2015) with step-by-step instructions and required tools.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shocks or short circuits.

Symptoms

•Check engine light illuminated
•Engine running smoothly after repairs
•No stored diagnostic trouble codes (DTCs) after inspection
•No abnormal noises or performance issues

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm that the issue has been resolved.
2
Turn off the engine and ensure that the ignition switch is in the 'OFF' position.
3
Disconnect the negative battery terminal for at least 10 minutes to reset the vehicle's computer.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket wrench
•Safety gloves

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner, socket wrench, safety gloves
Ensure the vehicle is parked on a level surface and the engine is off.
Gather all necessary tools and parts.

2. Use OBD-II Scanner

Plug the OBD-II scanner into the vehicle's diagnostic port, typically located under the dashboard near the steering column.
Turn the ignition key to the "ON" position without starting the engine.
Follow the scanner's prompts to read and clear any existing trouble codes. Select the option to "Clear Codes" or "Erase Codes."
Confirm that the codes have been cleared and the check engine light is off.

3. Disconnect Battery

Using a socket wrench, loosen the bolt on the negative battery terminal.
Remove the negative terminal from the battery post and secure it away from the battery for at least 10 minutes.
Reconnect the negative battery terminal and tighten the bolt securely.