how to reset my Honda Civic 9th Generation (2012-2015) maintenance light

Honda Civic 9th Generation (2012-2015)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

337 words

Problem Statement

Learn how to reset the maintenance light on your Honda Civic 9th Generation (2012-2015) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for scheduled maintenance displayed
•Engine oil change notification (if applicable)

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the gas pedal three times within 5 seconds.
3
Turn the ignition switch to the 'OFF' position.
4
Start the engine to confirm that the maintenance light is off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically needed for the reset process.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is in a safe location with the engine off.
Gather necessary tools for the reset, if needed (e.g., key fob).

2. Ignition Position

Insert the key into the ignition or have the key fob ready for push-to-start models.
Turn the ignition switch to the "ON" position. Do not start the engine.

3. Gas Pedal Action

Press the gas pedal down three times within a span of 5 seconds. Ensure each press is firm and deliberate.

4. Turn Off Ignition

Turn the ignition switch to the "OFF" position. Wait for a moment to ensure the system registers the reset process.

5. Start Engine

Start the engine to check that the maintenance light has been successfully reset. If the light is still on, repeat the process.