FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the traction control light on my Honda Civic 9th Generation (2012-2015) - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to fix the traction control light on my Honda Civic 9th Generation (2012-2015)

how to fix the traction control light on my Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
469 words

Problem Statement

Learn how to diagnose and fix the traction control light issue in Honda Civic 9th Generation (2012-2015). Step-by-step guide with tools and tips.

Affected Component
Electrical
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to avoid shorts and electrical shock.

Symptoms

  • •Traction control light illuminated on the dashboard
  • •Reduced engine power during acceleration
  • •Unusual wheel spin or slipping on slippery surfaces
  • •ABS warning light may also be illuminated
  • •Intermittent stability control issues

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Screwdriver
  • •Torque wrench
  • •Multimeter

Parts Required

  • •Wheel speed sensor (if faulty)
  • •Brake fluid (if needed)

Additional Information

Affected Component
Electrical
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Park the vehicle on a level surface and engage the parking brake.
  • Disconnect the negative battery terminal to prevent electrical shock.
2. Replace Faulty Wheel Speed Sensor
  • Tools Required: Socket set, screwdriver, multimeter, torque wrench.
  • Locate the wheel speed sensor that corresponds to the error codes retrieved.
  • Remove the wheel and tire to access the sensor.
  • Disconnect the wiring harness from the sensor.
  • Unbolt the old sensor using the socket set and remove it from the hub.
  • Install the new wheel speed sensor in reverse order, ensuring it is properly seated.
  • Torque the sensor bolt to the manufacturer's specifications (usually around 7-10 ft-lbs).
3. Clear Error Codes
  • Reconnect the negative battery terminal.
  • Use the OBD-II scanner to clear any diagnostic trouble codes (DTCs).
  • Start the vehicle and check if the traction control light remains off.
4. Test Drive
  • Take the vehicle for a test drive to ensure that the traction control system is functioning correctly.
  • Monitor for any re-illuminations of the traction control light.