FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the traction control light on my Honda Civic 9th Generation (2012-2015)? - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to fix the traction control light on my Honda Civic 9th Generation (2012-2015)?

how to fix the traction control light on my Honda Civic 9th Generation (2012-2015)?

Honda Civic 9th Generation (2012-2015)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
593 words

Problem Statement

Learn how to diagnose and fix the traction control light issue on your 2012-2015 Honda Civic. Step-by-step guide with symptoms and solutions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before inspecting components.

Symptoms

  • •Traction control light illuminated on the dashboard
  • •Possible loss of traction in slippery conditions
  • •Check engine light may also be present
  • •Unusual noises from the wheels when accelerating
  • •Reduced engine power during acceleration
  • •Difficulty maintaining stability during turns

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Wire brush
  • •Cleaning solution

Parts Required

  • •Wheel speed sensor (if faulty)
  • •Traction control switch (if faulty)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the engine is off.
  • Disconnect the battery negative terminal to prevent electrical shorts.
2. Inspect and Clean Wheel Speed Sensors
  • Tools Required: Socket set, wire brush, cleaning solution
    • Remove the wheel on the affected side.
    • Locate the wheel speed sensor mounted near the brake rotor.
    • Disconnect the sensor wiring harness.
    • Remove the sensor using the socket set.
    • Clean the sensor tip with a wire brush and cleaning solution to remove dirt and debris.
    • Reinstall the sensor and reconnect the wiring harness.
    • Repeat for all wheel speed sensors if necessary.
3. Check ABS Module Connections
  • Tools Required: Multimeter
    • Locate the ABS module, typically near the brake master cylinder.
    • Inspect all electrical connections and wiring for signs of damage or corrosion.
    • Use a multimeter to test for continuity in the ABS module wiring.
    • Repair or replace any damaged wiring or connectors.
4. Verify Traction Control Switch
  • Tools Required: None
    • Locate the traction control switch on the dashboard.
    • Press the switch to ensure it is functioning correctly (the light should turn off).
    • If the switch is faulty, replace it with a new one.
5. Inspect Brake Fluid Level
  • Tools Required: None
    • Open the hood and locate the brake fluid reservoir.
    • Check the fluid level; it should be between the MIN and MAX indicators.
    • If low, top off with the recommended brake fluid type (usually DOT 3 or DOT 4).
    • Inspect for any leaks in the brake lines or at the master cylinder.