FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the rear window wiper on my Honda Civic 9th Generation (2012-2015) - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to fix the rear window wiper on my Honda Civic 9th Generation (2012-2015)

how to fix the rear window wiper on my Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
527 words

Problem Statement

Step-by-step guide to fix the rear window wiper on Honda Civic 2012-2015. Includes symptoms, diagnostic steps, tools, and parts required.

Affected Component
Electrical
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Use caution when handling sharp tools and components.

Symptoms

  • •Rear wiper does not operate when activated
  • •Wiper motor makes a clicking sound but does not move
  • •Wiper blade moves sluggishly or does not complete its cycle
  • •Wiper operates intermittently or stops mid-cycle
  • •Rear window washer fluid does not spray

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •14mm socket and ratchet
  • •Trim removal tool
  • •Wiper arm puller
  • •Torque wrench

Parts Required

  • •New rear wiper motor
  • •New wiper blade

Additional Information

Affected Component
Electrical
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative terminal of the battery for safety.
  • Ensure the vehicle is parked on a level surface.
2. Inspect and Replace the Rear Wiper Motor
  1. Remove the Wiper Arm:

    • Use a 14mm socket to remove the nut securing the wiper arm.
    • Gently pull off the wiper arm; if stuck, use a wiper arm puller.
  2. Access the Wiper Motor:

    • Remove the interior trim panel of the rear hatch to access the motor.
    • Use a trim removal tool to avoid damaging the clips.
  3. Disconnect the Motor:

    • Locate the electrical connector on the rear wiper motor.
    • Disconnect the harness by pressing the release tab and pulling it off.
  4. Remove the Wiper Motor:

    • Unscrew the mounting bolts securing the wiper motor using a socket set.
    • Carefully remove the motor and the linkage assembly.
  5. Install the New Motor:

    • Position the new wiper motor in place and secure it with the mounting bolts.
    • Reconnect the electrical harness to the motor.
3. Reassemble Components
  1. Reinstall the Wiper Arm:

    • Place the wiper arm back onto the motor shaft and tighten the nut to 14 Nm (10 lb-ft).
    • Ensure the wiper blade is aligned correctly on the rear window.
  2. Reattach the Interior Trim:

    • Snap the interior trim panel back into place, ensuring all clips are secured.
  3. Reconnect the Battery:

    • Reconnect the negative terminal of the battery.