how to fix Honda Civic 9th Generation (2012-2015) transmission jerking during shifts?

Honda Civic 9th Generation (2012-2015)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

576 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in Honda Civic 9th Generation (2012-2015). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before opening the transmission fluid system.

Symptoms

•Jerking or harsh shifting during acceleration
•Slipping transmission while changing gears
•Delayed engagement when shifting from park to drive or reverse
•Check engine light illuminated
•Unusual noises during gear changes
•Increased fuel consumption

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner for any stored error codes related to the transmission.
2
Check transmission fluid level and condition; look for discoloration or burnt smell.
3
Inspect the transmission fluid filter for clogs or blockages.
4
Examine the transmission mounts for wear or damage.
5
Test the throttle position sensor (TPS) for proper voltage output.
6
Inspect the vehicle’s wiring harness and connectors for corrosion or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Funnel
•Drain pan
•Jack stands

Parts Required

•Transmission fluid (as per specifications)
•Transmission filter (if applicable)
•Transmission mount (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner for any stored error codes related to the transmission.
2
Check transmission fluid level and condition; look for discoloration or burnt smell.
3
Inspect the transmission fluid filter for clogs or blockages.
4
Examine the transmission mounts for wear or damage.
5
Test the throttle position sensor (TPS) for proper voltage output.
6
Inspect the vehicle’s wiring harness and connectors for corrosion or damage.

Solution

1. Preparation

Gather tools and parts for the repair.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the negative battery terminal.

2. Check and Replace Transmission Fluid

Tools Required: Socket set, funnel, drain pan, new transmission fluid (check manufacturer specifications), new transmission filter (if applicable).
1. Locate the transmission drain plug and place a drain pan underneath.
2. Remove the drain plug and allow the old fluid to completely drain.
3. Replace the drain plug and torque it to the manufacturer’s specifications.
4. Remove the transmission dipstick, insert a funnel, and add new transmission fluid slowly.
5. Start the engine and let it idle, then check the fluid level with the dipstick; add more fluid if necessary.

3. Replace Transmission Filter (if applicable)

Tools Required: Socket set, new transmission filter kit (if required).
1. Locate the transmission pan and remove the bolts using a socket set.
2. Carefully lower the transmission pan and drain any remaining fluid into the pan.
3. Remove the old transmission filter and install the new filter according to the manufacturer's instructions.
4. Clean the transmission pan and replace the gasket as needed before reinstalling the pan.

4. Inspect and Replace Transmission Mounts (if necessary)

Tools Required: Jack stands, socket set.
1. Raise the vehicle using jack stands for access to the undercarriage.
2. Inspect the transmission mounts for cracks or excessive wear.
3. If damaged, remove the bolts securing the mount and replace it with a new mount.
4. Reinstall bolts and torque them to the manufacturer’s specifications.

5. Reconnect Battery

Reconnect the negative battery terminal and ensure it is tight.