how to fix Honda Civic 9th Generation (2012-2015) tire pressure monitoring system

Honda Civic 9th Generation (2012-2015)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

562 words

Problem Statement

Learn how to diagnose and fix the Tire Pressure Monitoring System in Honda Civic 9th Generation (2012-2015). Step-by-step guide with tools and tips.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always allow tires to cool before checking tire pressure to get an accurate reading.
•Ensure the vehicle is securely parked and the parking brake is applied before working on tires.

Symptoms

•TPMS warning light illuminated on the dashboard
•Incorrect tire pressure displayed on the dashboard
•Tire pressure readings fluctuate unexpectedly
•Warning message indicating a tire pressure issue
•Possible loss of TPMS functionality after tire rotation or replacement

Diagnostic Steps

1
Scan the vehicle's OBD-II system using a scanner to check for TPMS-related error codes.
2
Inspect each tire visually for proper inflation and any signs of damage or leaks.
3
Check the tire pressure in all tires using a reliable tire pressure gauge.
4
Verify that the TPMS sensors are correctly installed and functional after recent tire service.
5
Reset the TPMS system using the vehicle's onboard reset button or via the OBD-II scanner.
6
Confirm the vehicle's tire sizes are correctly programmed in the TPMS system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner
•TPMS reset tool

Parts Required

•TPMS sensors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system using a scanner to check for TPMS-related error codes.
2
Inspect each tire visually for proper inflation and any signs of damage or leaks.
3
Check the tire pressure in all tires using a reliable tire pressure gauge.
4
Verify that the TPMS sensors are correctly installed and functional after recent tire service.
5
Reset the TPMS system using the vehicle's onboard reset button or via the OBD-II scanner.
6
Confirm the vehicle's tire sizes are correctly programmed in the TPMS system.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Tools required: Tire pressure gauge, OBD-II scanner, TPMS reset tool (if applicable).

2. Inspect and Inflate Tires

Sub-steps:
- Use a tire pressure gauge to check the pressure in each tire, including the spare.
- Inflate or deflate the tires to the manufacturer's recommended pressure (found on the driver’s door jamb).

3. Check TPMS Sensors

Sub-steps:
- If tires have been replaced or rotated, ensure that the TPMS sensors are properly mounted in the new tires.
- If any sensors are damaged, replace them with compatible TPMS sensors.

4. Reset the TPMS

Sub-steps:
- Turn the ignition to the "ON" position without starting the engine.
- Press and hold the TPMS reset button (located under the steering column) until the TPMS indicator blinks twice and then goes out.
- Alternatively, use an OBD-II scanner to reset the TPMS if the manual reset does not work.

5. Test Drive and Monitor

Sub-steps:
- Drive the vehicle for a short distance (around 10-15 minutes) to allow the system to recalibrate.
- Monitor the TPMS light to ensure it remains off and check for any alerts.