how to fix Honda Civic 9th Generation (2012-2015) rearview camera not working

Honda Civic 9th Generation (2012-2015)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

561 words

Problem Statement

Learn how to diagnose and fix the rearview camera issue in Honda Civic 9th Generation (2012-2015). Step-by-step guide with tools and safety tips.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shocks or shorts.
•Ensure the vehicle is in a stationary position with the parking brake engaged while testing the camera.

Symptoms

•No display from the rearview camera when the vehicle is in reverse
•Error message on the screen indicating a camera malfunction
•Camera image appears distorted or flickering
•Backup sensors may also not function properly
•Check for relevant dashboard warning lights

Diagnostic Steps

1
Inspect the rearview camera lens for physical damage or obstructions.
2
Check the vehicle's fuse box for a blown fuse associated with the rearview camera.
3
Use an OBD-II scanner to check for any error codes related to the camera system.
4
Inspect the wiring harness connected to the rearview camera for loose connections or fraying.
5
Test the rearview camera directly by connecting it to a multimeter to check for power and ground.
6
Verify settings on the vehicle’s infotainment system to ensure camera functionality is enabled.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Torx screwdriver
•Fuse puller

Parts Required

•Rearview camera (if replacement is needed)
•Appropriate fuse (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the rearview camera lens for physical damage or obstructions.
2
Check the vehicle's fuse box for a blown fuse associated with the rearview camera.
3
Use an OBD-II scanner to check for any error codes related to the camera system.
4
Inspect the wiring harness connected to the rearview camera for loose connections or fraying.
5
Test the rearview camera directly by connecting it to a multimeter to check for power and ground.
6
Verify settings on the vehicle’s infotainment system to ensure camera functionality is enabled.

Solution

1. Preparation

Gather tools and necessary parts.
Disconnect the vehicle battery to ensure safety while working on electrical components.

2. Inspect the Camera and Wiring

Tools Required: Torx screwdriver, multimeter
Remove the screws securing the rearview camera housing using a Torx screwdriver.
Carefully pull the camera out to inspect for any physical damage or obstructions on the lens.
Check the wiring harness connected to the camera for any damage or loose connections.

3. Replace the Fuse (if necessary)

Tools Required: Fuse puller
Locate the fuse box under the dashboard or in the engine compartment.
Identify the fuse related to the rearview camera (refer to the vehicle’s manual).
Use a fuse puller to remove the fuse and check if it is blown.
Replace it with a new fuse of the same amperage.

4. Reconnect or Replace the Camera

If the camera is damaged, obtain a replacement camera compatible with the 2012-2015 Honda Civic.
Tools Required: Torx screwdriver
Disconnect the old camera by removing the wiring harness.
Connect the new camera to the wiring harness and secure it in place with screws.

5. Reassemble and Test

Reinstall any panels or components removed during the process.
Reconnect the vehicle battery.
Start the vehicle and shift it into reverse to test the rearview camera functionality.