FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix hard shifting in my Honda Civic 9th Generation (2012-2015) CVT - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to fix hard shifting in my Honda Civic 9th Generation (2012-2015) CVT

how to fix hard shifting in my Honda Civic 9th Generation (2012-2015) CVT

Honda Civic 9th Generation (2012-2015)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
547 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix hard shifting in Honda Civic 9th Generation CVT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Allow the engine to cool completely before opening the transmission.

Symptoms

  • •Noticeable jerking during acceleration
  • •Increased engine RPMs without corresponding speed increase
  • •Delayed response when accelerating
  • •Unusual noises from the transmission area
  • •Check transmission fluid temperature warning light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Multimeter
  • •Funnel

Parts Required

  • •CVT fluid (specific to Honda specifications)
  • •Transmission filter (if applicable)
  • •Gasket for transmission pan (if applicable)

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery to prevent electrical shorts.
2. Change Transmission Fluid

  1. Drain Old Fluid

    • Locate the transmission fluid drain plug.
    • Use a socket set to remove the plug and drain the old fluid into a suitable container.
    • Replace the drain plug and tighten it to the manufacturer's torque specifications (typically around 30 ft-lbs).

  2. Replace Filter (if applicable)

    • Remove the transmission pan (if applicable) using a socket set.
    • Replace the old filter with a new one, ensuring the gasket is properly seated.
    • Reinstall the pan and tighten the bolts to the specified torque (typically around 10 ft-lbs).

  3. Add New Fluid

    • Using a funnel, add the recommended CVT fluid (refer to the owner's manual for specifications).
    • Start the engine and let it idle for a few minutes, then check the fluid level with the dipstick.
3. Inspect and Replace CVT Components (if necessary)

  1. Inspect CVT Belt and Pulleys

    • Remove the CVT cover (if applicable) to gain access.
    • Check the CVT belt for signs of wear or damage, and the pulleys for proper alignment and condition.
    • Replace any damaged components according to the manufacturer’s specifications.

  2. Check and Adjust Throttle Position Sensor

    • Locate the throttle position sensor.
    • Use a multimeter to check the sensor voltage and resistance.
    • Adjust or replace the sensor as needed to ensure proper operation.