FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Honda Civic 9th Generation (2012-2015) AC not blowing cold air what should I check - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/Honda Civic 9th Generation (2012-2015) AC not blowing cold air what should I check

Honda Civic 9th Generation (2012-2015) AC not blowing cold air what should I check

Honda Civic 9th Generation (2012-2015)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
549 words

Problem Statement

Learn how to diagnose and fix AC not blowing cold air in Honda Civic 9th Generation. Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component
HVAC
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before inspecting or servicing the AC system.

Symptoms

  • •AC compressor not engaging
  • •Warm air blowing from vents
  • •Unusual noises from the AC system
  • •Moisture or water leaking inside the cabin
  • •"Check Engine" or "AC" warning light illuminated on the dashboard

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Manifold gauge set
  • •Fuse puller
  • •Screwdrivers
  • •Socket set

Parts Required

  • •AC compressor fuse (if blown)
  • •Refrigerant (R-134a)
  • •Cabin air filter (if needed)

Additional Information

Affected Component
HVAC
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the vehicle battery to ensure safety while working on electrical components.
2. Check and Replace AC Compressor Fuse
  • Locate the fuse box (usually under the dashboard or in the engine compartment).
  • Identify the fuse for the AC compressor and remove it using a fuse puller.
  • Inspect the fuse for continuity; replace it if blown.
  • Reinstall the fuse and reconnect the battery.
3. Recharge Refrigerant
  • Connect the manifold gauge set to the AC service ports (low and high side).
  • Check the refrigerant pressure; if low, proceed to add refrigerant.
  • Use the appropriate type of refrigerant (typically R-134a for this model).
  • Follow the manufacturer’s specifications to fill the system, monitoring the pressure gauges.
  • Ensure no overcharging occurs, as this can cause damage to the AC system.
4. Inspect and Clean AC Components
  • Visually inspect the AC condenser; use compressed air or a soft brush to clean off any debris or dirt.
  • Check for any bent fins on the condenser that may restrict airflow and carefully straighten them if needed.
  • Inspect the cabin air filter for dirt and replace if necessary.
5. Test AC System Functionality
  • Reconnect the battery and start the vehicle.
  • Turn on the AC to the maximum setting and monitor the system operation.
  • Listen for the compressor engaging and check the temperature of the air coming from the vents.