why does my Honda Civic make a grinding noise when turning

Solution

1. Preparation

• Gather necessary tools and parts.
• Park the vehicle on a level surface and engage the parking brake.

2. Inspect Power Steering System

• Sub-steps:
  1. Locate the power steering reservoir and check fluid levels.
  2. If low, top off with manufacturer-recommended power steering fluid.
  3. Inspect the reservoir for cracks or leaks.

3. Replace Worn CV Joints (if applicable)

• Sub-steps:
  1. Loosen the lug nuts on the front wheels and lift the vehicle using a jack.
  2. Remove the front wheels.
  3. Disconnect the axle from the wheel hub by removing the axle nut.
  4. Detach the CV joint from the transmission side.
  5. Install the new CV joint and reattach it to the transmission and wheel hub.
  6. Reinstall the wheel and lower the vehicle.

4. Replace or Lubricate Steering Components

• Sub-steps:
  1. Inspect tie rods and ball joints for wear or damage.
  2. If damaged, remove the components using a socket set.
  3. Replace with new parts and torque to manufacturer specifications.
  4. Lubricate any grease fittings as necessary.

5. Inspect and Replace Wheel Bearings (if applicable)

• Sub-steps:
  1. Remove the wheel and brake assembly.
  2. Inspect the wheel bearing for excessive play or noise.
  3. If worn, remove the bearing using a bearing puller.
  4. Install a new wheel bearing and reassemble the brake and wheel assembly.

Tools Required:

• Socket set
• Jack and jack stands
• Bearing puller
• Torque wrench
• Power steering fluid

Parts Required:

• Power steering fluid (if needed)
• CV joints (if applicable)
• Tie rods or ball joints (if needed)
• Wheel bearings (if needed)

Estimated Repair Time: 2-4 hours

Safety Warnings:

• Always disconnect the battery before working on electrical systems.
• Ensure the vehicle is securely supported on jack stands before working underneath.