why does my Honda Civic 10th Generation (2016-2021) make a grinding noise when turning

Honda Civic 11th Generation (2022-Present)

Error Codes

3-5 hours

Time

medium

Difficulty

medium

Severity

3 min read

584 words

Problem Statement

Learn how to diagnose and fix grinding noise when turning in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms and solutions.

Affected Component

Steering

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Disconnect the battery before working on electrical components.

Symptoms

•Grinding noise when turning the steering wheel
•Increased steering resistance or difficulty in turning
•Vibration in the steering wheel during turns
•Uneven tire wear
•Fluid leaks around the steering components

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible leaks or damage in the power steering system.
3
Examine the CV joints for wear or damage.
4
Inspect the wheel bearings for excessive play or noise.
5
Evaluate the condition of the suspension components such as struts and control arms.
6
Test drive the vehicle to replicate the noise and assess under various turning conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Funnel
•Bearing press
•Alignment tool

Parts Required

•Power steering fluid
•CV joint/axle assembly
•Wheel bearings
•Suspension components (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible leaks or damage in the power steering system.
3
Examine the CV joints for wear or damage.
4
Inspect the wheel bearings for excessive play or noise.
5
Evaluate the condition of the suspension components such as struts and control arms.
6
Test drive the vehicle to replicate the noise and assess under various turning conditions.

Solution

1. Preparation

Gather the necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the negative battery terminal if working on electronic components.

2. Inspect and Replace Power Steering Fluid

Sub-steps:
1. Locate the power steering reservoir and remove the cap.
2. Check the fluid level; if it’s low, top up with the manufacturer-recommended power steering fluid.
3. If the fluid is dark or contaminated, perform a fluid change by draining the old fluid from the reservoir and refilling with new fluid.
Tools Required: Funnel, power steering fluid.

3. Replace Damaged CV Joints

Sub-steps:
1. Lift the vehicle and remove the front wheels.
2. Inspect the CV boots for tears; if damaged, remove the axle nut and detach the CV joint from the hub.
3. Replace with a new CV joint or axle assembly as needed.
4. Reinstall the hub and wheel, ensuring all fasteners are torqued to specifications.
Tools Required: Socket set, torque wrench, CV joint replacement kit.

4. Replace Wheel Bearings (if faulty)

Sub-steps:
1. Remove the wheel and brake assembly.
2. Detach the hub assembly from the steering knuckle.
3. Press out the old bearing and press in a new bearing using a bearing press tool.
4. Reassemble the hub and brake components, ensuring proper torque settings.
Tools Required: Bearing press, socket set, torque wrench.

5. Inspect and Repair Suspension Components

Sub-steps:
1. Visually inspect struts, control arms, and bushings for signs of wear or damage.
2. Replace any worn or damaged components with OEM or high-quality aftermarket parts.
3. Ensure proper installation and alignment of all components.
Tools Required: Wrench set, alignment tool.