FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda Civic 10th Generation (2016-2021) have a check brake system light? - Honda Civic
Home/Cars/Honda/Civic/11th Generation (2022-Present)/why does my Honda Civic 10th Generation (2016-2021) have a check brake system light?

why does my Honda Civic 10th Generation (2016-2021) have a check brake system light?

Honda Civic 11th Generation (2022-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
583 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the check brake system light on Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always wear safety glasses and gloves when working on the brake system.
  • •Ensure the vehicle is securely lifted and supported before working underneath.

Symptoms

  • •Check brake system light illuminated on the dashboard
  • •Reduced braking performance or spongy brake pedal
  • •Abnormal sounds when braking (squeaking or grinding)
  • •Brake fluid level warning light may also be illuminated
  • •Warning message on the display regarding braking system
  • •Unusual vibrations when applying brakes

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Brake pressure gauge
  • •Jack and jack stands
  • •Torque wrench

Parts Required

  • •Brake pads
  • •Brake rotors (if needed)
  • •Brake fluid (DOT 3 or DOT 4)

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and materials.
  • Ensure the vehicle is on a level surface and secured with jack stands if lifting.
  • Disconnect the battery to prevent any electrical issues while working.
2. Check Brake Fluid Level
  • Remove the brake fluid reservoir cap.
  • Inspect the fluid level; it should be between the "MIN" and "MAX" marks.
  • If low, top up with the recommended brake fluid (DOT 3 or DOT 4 as specified in the owner's manual).
3. Inspect Brake Components
  • Remove the wheel to access the brake assembly.
  • Examine the brake pads for thickness; replace if worn down to 3mm or less.
  • Inspect the rotors for any grooves or damage; replace if necessary.
  • Check the brake lines for leaks or cracks and replace any damaged sections.
4. Replace Components (if necessary)
  • If brake pads are worn:
    1. Remove the caliper bolts using a socket set.
    2. Carefully slide the caliper off the rotor.
    3. Replace old pads with new ones ensuring they are correctly seated.
    4. Reinstall the caliper and torque bolts to manufacturer specifications (typically around 25-35 Nm).
  • If rotors are damaged:
    1. Remove the caliper and bracket.
    2. Remove the rotor from the hub; may require a hammer to loosen if stuck.
    3. Install new rotor ensuring it is seated properly.
5. Reassemble and Test
  • Reinstall the wheel and lower the vehicle.
  • Reconnect the battery.
  • Start the vehicle and press the brake pedal several times to ensure proper seating of components.
  • Check for any leaks around the brake system.