FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what should I do if my Honda Civic 10th Generation (2016-2021) loses power while driving - Honda Civic
Home/Cars/Honda/Civic/11th Generation (2022-Present)/what should I do if my Honda Civic 10th Generation (2016-2021) loses power while driving

what should I do if my Honda Civic 10th Generation (2016-2021) loses power while driving

Honda Civic 11th Generation (2022-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
586 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix loss of power issues in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the throttle body or fuel system components.

Symptoms

  • •Check engine light illuminated
  • •Engine stalling or hesitation during acceleration
  • •Rough idle or poor engine performance
  • •Unusual engine noises (knocking or pinging)
  • •Decreased fuel economy
  • •Increased exhaust emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Fuel pressure gauge
  • •Throttle body cleaner
  • •Torque wrench

Parts Required

  • •Fuel filter
  • •Spark plugs (if needed)
  • •Throttle body gasket (if needed)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface with the engine off.
  • Disconnect the battery to prevent electrical shorts during repair.
2. Addressing Fuel System Issues

  1. Inspect Fuel Pressure:

    • Connect a fuel pressure gauge to the fuel rail.
    • Turn the ignition to the "ON" position (without starting the engine) to check pressure.
    • Compare readings to manufacturer specifications (typically around 40-50 psi).
    • If low, check the fuel pump and filter.

  2. Replace Fuel Filter (if necessary):

    • Locate the fuel filter (usually near the fuel tank or along the fuel line).
    • Use a socket set to remove the filter while ensuring fuel lines are depressurized.
    • Install the new filter in the correct orientation, tightening to manufacturer specifications.
3. Ignition System Check
  1. Inspect Spark Plugs:
    • Remove the ignition coils using a socket set.
    • Extract the spark plugs for visual inspection (look for wear or carbon buildup).
    • Replace any faulty spark plugs with OEM parts, ensuring proper gap settings.
4. Clean Throttle Body

  1. Remove Throttle Body:

    • Disconnect the throttle body electrical connector.
    • Use a socket set to remove bolts securing the throttle body.
    • Carefully detach the throttle body from the intake manifold.

  2. Clean Throttle Body:

    • Use throttle body cleaner and a soft brush to clean the inside surfaces.
    • Ensure that the throttle plate moves freely and is not sticky.
    • Reattach the throttle body, torque bolts to manufacturer specifications.
5. Reconnect and Test
  • Reconnect the battery and start the engine.
  • Perform a visual inspection for leaks and listen for unusual sounds.
  • Clear any fault codes using the OBD-II scanner.