FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 10th Generation (2016-2021) won't start what should I check first - Honda Civic
Home/Cars/Honda/Civic/11th Generation (2022-Present)/my Honda Civic 10th Generation (2016-2021) won't start what should I check first

my Honda Civic 10th Generation (2016-2021) won't start what should I check first

Honda Civic 11th Generation (2022-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
609 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the no-start issue in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on any electrical components.
  • •Ensure the vehicle is in park or neutral and the parking brake is engaged before starting repairs.

Symptoms

  • •Engine does not crank when the ignition key is turned
  • •Dashboard lights illuminate but go out when attempting to start
  • •Clicking sound when turning the key
  • •No fuel pump activation sound
  • •Security indicator light flashing
  • •Battery warning light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Battery terminal cleaner
  • •Wrench set
  • •Screwdriver set

Parts Required

  • •Replacement battery (if necessary)
  • •Ignition switch (if defective)
  • •Starter motor (if defective)
  • •Fuel pump relay (if defective)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
4 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shock.
2. Battery Check and Replacement
  • Tools Required: Multimeter, battery terminal cleaner, wrench set.
  • Sub-steps:
    1. Use the multimeter to measure the battery voltage. If it’s below 12.4 volts, charge or replace the battery.
    2. Clean the battery terminals with a terminal cleaner if corrosion is present.
    3. Reconnect the battery terminals securely.
3. Ignition Switch Inspection
  • Tools Required: Screwdriver set.
  • Sub-steps:
    1. Remove the steering column cover to access the ignition switch.
    2. Inspect the ignition switch for wear or damage.
    3. Use a multimeter to test for continuity when the key is turned to the "start" position.
    4. Replace the ignition switch if it fails the continuity test.
4. Starter Motor Testing
  • Tools Required: Multimeter, wrench set.
  • Sub-steps:
    1. Locate the starter motor, usually found near the bottom of the engine.
    2. Check the electrical connections to the starter motor for tightness and corrosion.
    3. Use a multimeter to check for voltage at the starter when the ignition is turned to "start."
    4. If no voltage is present, trace back to the ignition switch or relay; if voltage is present but the starter doesn’t engage, replace the starter motor.
5. Fuel Pump Relay Check
  • Tools Required: Multimeter, relay tester (optional).
  • Sub-steps:
    1. Locate the fuel pump relay in the fuse box (refer to the owner’s manual for exact location).
    2. Use a multimeter to test for continuity and ensure the relay is functional.
    3. If the relay is faulty, replace it and recheck for fuel pump activation.