my Honda Civic 10th Generation (2016-2021) shakes when I drive over 60 mph

Honda Civic 11th Generation (2022-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

515 words

Problem Statement

Learn how to diagnose and fix shaking issues over 60 mph in Honda Civic 10th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted and supported on jack stands before working underneath it.
•Wear safety glasses and gloves while handling components.

Symptoms

•Noticeable shaking or vibration in the steering wheel or cabin at speeds over 60 mph
•Uneven tire wear
•Steering wheel vibration that varies with speed
•Possible noise from the wheels or suspension
•Difficulty maintaining a straight line while driving

Diagnostic Steps

1
Inspect the tire condition for uneven wear or damage.
2
Check the tire pressure and ensure it is within manufacturer specifications.
3
Perform a wheel balance check to identify any unbalanced tires.
4
Inspect the suspension components (e.g., struts, control arms) for wear or damage.
5
Examine the wheel bearings for play or noise.
6
Conduct a visual inspection of the driveshaft and CV joints for any signs of wear.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Tire pressure gauge
•Wheel balancer
•Socket set
•Torque wrench
•Bearing puller

Parts Required

•Tires (if damaged)
•Wheel bearings (if worn)
•Suspension components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the tire condition for uneven wear or damage.
2
Check the tire pressure and ensure it is within manufacturer specifications.
3
Perform a wheel balance check to identify any unbalanced tires.
4
Inspect the suspension components (e.g., struts, control arms) for wear or damage.
5
Examine the wheel bearings for play or noise.
6
Conduct a visual inspection of the driveshaft and CV joints for any signs of wear.

Solution

1. Tire Inspection and Replacement

Sub-steps:
1. Remove the wheel from the affected tire.
2. Inspect for uneven wear patterns; replace tires if necessary.
3. Check for any visible damage such as cuts or bulges.
Tools Required:
- Jack and jack stands
- Tire pressure gauge

2. Wheel Balancing

Sub-steps:
1. Remove the wheel and take it to a tire shop or use a wheel balancer.
2. Balance the wheel and tire assembly according to specifications.
3. Reinstall the wheel onto the vehicle.
Tools Required:
- Wheel balancer (if doing it yourself)

3. Suspension Component Inspection and Repair

Sub-steps:
1. Lift the vehicle and secure it on jack stands.
2. Inspect suspension components for wear or damage (struts, bushings).
3. Replace any worn or damaged suspension parts as needed.
4. Tighten all bolts to the manufacturer’s torque specifications.
Tools Required:
- Socket set
- Torque wrench

4. Wheel Bearing Replacement (if necessary)

Sub-steps:
1. Remove the wheel and brake caliper.
2. Disconnect the axle from the wheel hub.
3. Remove the wheel bearing using a bearing puller.
4. Install the new wheel bearing and reassemble the components.
Tools Required:
- Bearing puller
- Socket set