my Honda Civic 10th Generation (2016-2021) power locks not working how to fix

Honda Civic 11th Generation (2022-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

559 words

Problem Statement

Learn how to diagnose and fix non-functional power locks in Honda Civic 10th Generation (2016-2021). Step-by-step guide with tools and solutions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow any electronic components to discharge before handling to avoid static damage.

Symptoms

•Power lock system does not respond to the remote key fob
•Power lock system does not respond to the interior lock/unlock switch
•No audible clicking sound when attempting to lock/unlock
•Indicator lights on the key fob do not illuminate
•Possible blown fuse related to the power lock system

Diagnostic Steps

1
Inspect the key fob battery and replace if necessary.
2
Check the interior lock/unlock switch for physical damage or obstruction.
3
Use an OBD-II scanner to check for any related error codes in the Body Control Module (BCM).
4
Inspect the fuses related to the power lock system for any blown fuses.
5
Test the power lock actuator for voltage using a multimeter when the switch is activated.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdriver set
•Fuse puller

Parts Required

•Replacement fuse (if necessary)
•Replacement key fob battery (if necessary)
•Power lock actuator (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the key fob battery and replace if necessary.
2
Check the interior lock/unlock switch for physical damage or obstruction.
3
Use an OBD-II scanner to check for any related error codes in the Body Control Module (BCM).
4
Inspect the fuses related to the power lock system for any blown fuses.
5
Test the power lock actuator for voltage using a multimeter when the switch is activated.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative terminal of the battery to ensure safety.

Tools Required:

OBD-II scanner
Multimeter
Socket set
Screwdriver set
Replacement fuse (if needed)

2. Inspect the Fuse

Locate the fuse box (usually under the dashboard or hood).
Identify the fuse related to the power locks (refer to the owner’s manual for the specific fuse number).
Remove the fuse using a fuse puller or pliers.
Inspect the fuse for continuity. If it is blown, replace it with a new fuse of the same amperage.

3. Test the Key Fob

Replace the battery in the key fob, ensuring correct polarity.
Re-test the key fob to check if the power locks respond.

4. Test the Lock Switch

Remove the interior door panel to access the lock switch.
Visually inspect the switch for any damage or loose connections.
Use a multimeter to check for continuity across the switch terminals when pressed. Replace if faulty.

5. Inspect and Test the Power Lock Actuator

Remove the door panel to access the power lock actuator.
Disconnect the actuator connector.
With the multimeter, check for voltage at the actuator connector with the switch activated.
If no voltage is present, the wiring harness may be damaged or the BCM may need inspection. If voltage is present but the actuator does not respond, replace the actuator.