my Honda Civic 10th Generation (2016-2021) interior lights stay on

Honda Civic 11th Generation (2022-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

547 words

Problem Statement

Learn how to diagnose and fix the issue of interior lights staying on in Honda Civic 10th Generation (2016-2021). Step-by-step guide included.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shorts or shocks
•Allow time for any electrical components to discharge before handling

Symptoms

•Interior lights do not turn off after closing doors
•Doors may not lock automatically
•Door Ajar warning light illuminated on the dashboard
•Battery drains quickly when the vehicle is off
•Unusual clicking or buzzing sounds from interior light switch

Diagnostic Steps

1
Check the position of the interior light switch (e.g., ON, OFF, DOOR)
2
Inspect all doors to ensure they are fully closed and properly latched
3
Use an OBD-II scanner to check for any related error codes
4
Test the door jamb switches for proper operation using a multimeter
5
Inspect the wiring and connectors related to the interior lighting system for damage or corrosion
6
Check the vehicle's battery voltage to ensure it is within normal limits

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Screwdriver set
•Trim removal tool
•OBD-II scanner
•Wire stripper/crimper
•Electrical tape or heat-shrink tubing

Parts Required

•Door jamb switches (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the position of the interior light switch (e.g., ON, OFF, DOOR)
2
Inspect all doors to ensure they are fully closed and properly latched
3
Use an OBD-II scanner to check for any related error codes
4
Test the door jamb switches for proper operation using a multimeter
5
Inspect the wiring and connectors related to the interior lighting system for damage or corrosion
6
Check the vehicle's battery voltage to ensure it is within normal limits

Solution

1. Preparation

Gather tools and parts needed for the repair.
Tools Required:
- Multimeter
- Screwdriver set
- Trim removal tool
- OBD-II scanner
Ensure the vehicle is parked on a level surface and the engine is off.

2. Inspect and Test Door Jamb Switches

Sub-steps:
1. Locate the door jamb switches for each door (typically found on the door frame).
2. Disconnect the wiring harness from each switch.
3. Use a multimeter to test each switch for continuity; it should show continuity when pressed in.
4. If a switch fails the test, replace it with a new one.
Parts Required:
- Door jamb switches (if faulty)

3. Repair Wiring Issues

Sub-steps:
1. Visually inspect the wiring harness leading to the interior lights and door switches for any signs of damage or wear.
2. Repair or replace any damaged wires using appropriate electrical connectors.
3. Ensure all connections are secure and free from corrosion.
Tools Required:
- Wire stripper/crimper
- Electrical tape or heat-shrink tubing

4. Reset Interior Light System

Sub-steps:
1. Reconnect the battery if it was disconnected during the repair.
2. Turn the vehicle on and off several times to reset the interior light system.
3. Verify that the interior lights are functioning correctly by opening and closing each door.