FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 10th Generation (2016-2021) dashboard lights flicker while driving - Honda Civic
Home/Cars/Honda/Civic/11th Generation (2022-Present)/my Honda Civic 10th Generation (2016-2021) dashboard lights flicker while driving

my Honda Civic 10th Generation (2016-2021) dashboard lights flicker while driving

Honda Civic 11th Generation (2022-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
554 words

Problem Statement

Learn how to diagnose and fix dashboard lights flickering in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to avoid shocks
  • •Allow the engine to cool before inspecting components near it

Symptoms

  • •Dashboard lights flicker while driving
  • •Battery warning light illuminated
  • •Dim or erratic headlights
  • •Electrical accessories (e.g., radio, windows) malfunctioning
  • •Engine may experience stalling or difficulty starting

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Wrench set
  • •Visual inspection tools
  • •Fuse puller or pliers

Parts Required

  • •Replacement battery (if necessary)
  • •Replacement alternator (if necessary)
  • •Fuses (if blown)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and set the parking brake.
2. Inspect Battery and Connections
  • Tools Required: Wrench set, wire brush, multimeter
  • Disconnect the negative battery cable first, then the positive cable.
  • Clean battery terminals using a wire brush and baking soda solution if corrosion is present.
  • Reconnect the positive battery cable first, then the negative cable.
3. Test Battery Voltage
  • Tools Required: Multimeter
  • With the vehicle off, connect the multimeter leads to the battery terminals.
  • Voltage should read around 12.6 volts. If lower, replace the battery.
  • Start the engine and check voltage again; it should read between 13.7-14.7 volts.
4. Inspect and Test Alternator
  • Tools Required: Multimeter, socket set
  • Locate the alternator and check the connections for tightness.
  • Start the engine and measure the voltage at the alternator output terminal; it should be within the same range as above.
  • If the alternator is not producing sufficient voltage, replace it.
5. Check Wiring and Ground Connections
  • Tools Required: Visual inspection tools
  • Inspect the wiring harness for any frayed wires or loose connectors.
  • Ensure all ground connections on the vehicle frame and engine are clean and secure.
6. Replace Fuses if Necessary
  • Tools Required: Fuse puller or pliers
  • Locate the fuse box and check for any blown fuses related to dashboard lights or electrical systems.
  • Replace any blown fuses with the correct amperage rating.