FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 10th Generation (2016-2021) AC is not blowing cold air, how can I fix it? - Honda Civic
Home/Cars/Honda/Civic/11th Generation (2022-Present)/my Honda Civic 10th Generation (2016-2021) AC is not blowing cold air, how can I fix it?

my Honda Civic 10th Generation (2016-2021) AC is not blowing cold air, how can I fix it?

Honda Civic 11th Generation (2022-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
616 words

Problem Statement

Learn how to diagnose and fix AC not blowing cold air in Honda Civic 10th Generation (2016-2021). Step-by-step guide with tools and tips.

Affected Component
HVAC
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening any components related to the AC system.

Symptoms

  • •AC compressor not engaging
  • •Warm air blowing from vents
  • •Unusual noises from the AC system
  • •Smell of refrigerant or musty odors
  • •AC system cycling on and off frequently
  • •Reduced airflow from AC vents

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •AC manifold gauge set
  • •Multimeter
  • •Socket set
  • •Safety goggles

Parts Required

  • •AC refrigerant (R-134a)
  • •AC fuse (if blown)
  • •AC relay (if faulty)
  • •Cabin air filter (if dirty)

Additional Information

Affected Component
HVAC
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts.
  • Disconnect the vehicle's battery to ensure safety.
  • Gather necessary tools: AC manifold gauge set, multimeter, socket set, and safety goggles.
2. Inspect and Replace AC Fuse and Relay
  • Locate the fuse box in the engine compartment.
  • Remove the AC fuse and inspect it for continuity using a multimeter.
    • If blown, replace with a fuse of the same amperage.
  • Check the relay by swapping it with a similar relay in the fuse box.
    • If the AC works with the swapped relay, replace the relay.
3. Recharge Refrigerant
  • Connect the AC manifold gauge set to the low and high-pressure service ports.
  • Check the refrigerant levels; if low, proceed to recharge.
  • Follow these sub-steps:
    • Attach the refrigerant can to the low-pressure side.
    • Open the valve and allow refrigerant to flow into the system, monitoring pressure.
    • Close the valve once the system reaches the specified pressure (typically between 25-45 psi for R-134a).
4. Test AC Compressor
  • With the gauges still connected, start the engine and turn the AC to maximum.
  • Check if the compressor engages; listen for clicking noise.
    • If it does not engage, check the power supply using a multimeter on the compressor connector.
    • If no voltage is present, trace back to the AC control module for further diagnosis.
5. Replace Cabin Air Filter (if necessary)
  • Locate the cabin air filter housing, typically behind the glove box.
  • Remove the glove box or access panel to reach the filter.
  • Pull out the old filter and inspect it for dirt and blockage.
  • Insert a new cabin air filter, ensuring correct airflow direction.