FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Honda Civic 10th Generation (2016-2021) - Honda Civic
Home/Cars/Honda/Civic/11th Generation (2022-Present)/how to reset the maintenance light on my Honda Civic 10th Generation (2016-2021)

how to reset the maintenance light on my Honda Civic 10th Generation (2016-2021)

Honda Civic 11th Generation (2022-Present)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
338 words

Problem Statement

Learn how to reset the maintenance light on your Honda Civic 10th Generation (2016-2021) with this simple step-by-step guide.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' before turning the ignition on.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •No other warning lights are present
  • •Vehicle runs normally without any mechanical issues

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No tools required for this procedure.

Parts Required

  • •No parts required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this reset.
  • Ensure the vehicle is parked on a flat surface with the ignition off.
2. Reset the Maintenance Light
  1. Access the Dashboard Controls

    • Sit in the driver's seat and locate the "SELECT/RESET" knob on the instrument panel.
  2. Ignition Positioning

    • Press and hold the "SELECT/RESET" knob.
    • Turn the ignition to the "ON" position while keeping the knob pressed.
  3. Wait for the Light to Reset

    • Maintain pressure on the knob until the maintenance light blinks and then turns off, indicating the reset is successful.
  4. Final Check

    • Release the knob and turn the ignition back to the "OFF" position.
    • Start the engine to ensure the maintenance light remains off.