how to reset the maintenance light on Honda Civic 10th Generation (2016-2021)

Honda Civic 11th Generation (2022-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

352 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 10th Generation (2016-2021). Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral before starting the ignition.

Symptoms

•Maintenance light illuminated on the dashboard
•Possible accompanying message on the display
•No change in vehicle performance or handling

Diagnostic Steps

1
Confirm the maintenance light is on by checking the dashboard.
2
Verify if any other warning lights are present that may indicate additional issues.
3
Check the vehicle's service history to determine if maintenance is due.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this procedure.

Parts Required

•None required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Turn off all electrical accessories (radio, air conditioning).
Have the vehicle in the "ON" position without starting the engine.

2. Access the Odometer/Trip Meter

Press the "Engine Start/Stop" button without pressing the brake pedal to turn on the ignition.
Locate the odometer/trip meter button on the instrument cluster.

3. Reset the Maintenance Light

With the ignition in the "ON" position, press and hold the trip meter reset button until the odometer displays "0.00" or the maintenance light starts to blink.
Release the button and then press it again to confirm the reset.
The maintenance light should turn off, indicating a successful reset.

4. Turn Off the Ignition

Turn the vehicle's ignition off completely.
Wait a few seconds before restarting the engine to verify that the maintenance light is no longer illuminated.