how to reset the maintenance light on Honda Civic 10th Generation (2016-2021)

Honda Civic 11th Generation (2022-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

334 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 10th Generation (2016-2021) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is in a safe location and the ignition is off before performing any maintenance tasks.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or service overdue
•No other performance issues related to the vehicle

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position (do not start the engine).
2
Verify that the maintenance light is currently illuminated on the dashboard.
3
Locate the trip reset button on the dashboard.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Have the vehicle in the "On" position without starting the engine.

2. Access the Maintenance Reset Procedure

Press the trip reset button until the trip mileage is displayed.
Turn off the ignition.

3. Reset the Maintenance Light

While holding the trip reset button, turn the ignition back to the "On" position (do not start the engine).
Continue to hold the trip reset button until the maintenance light begins to blink and then goes out (this may take about 10 seconds).
Release the trip reset button.

4. Verify the Reset

Turn off the ignition and then turn it back on to check that the maintenance light is no longer illuminated.