how to reset the maintenance light on Honda Civic 10th Generation (2016-2021)

Honda Civic 11th Generation (2022-Present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

311 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 10th Generation (2016-2021) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and the ignition is turned off before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Message indicating 'Maintenance Due' or similar
•No other warning lights are illuminated

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position.
2
Press and hold the 'Select/Reset' button on the instrument panel.
3
Turn the ignition switch to the 'On' position without starting the engine.
4
Continue to hold the 'Select/Reset' button until the maintenance light begins to blink, then release the button.
5
Verify that the maintenance light has reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position.
2
Press and hold the 'Select/Reset' button on the instrument panel.
3
Turn the ignition switch to the 'On' position without starting the engine.
4
Continue to hold the 'Select/Reset' button until the maintenance light begins to blink, then release the button.
5
Verify that the maintenance light has reset.

Solution

1. Preparation

Ensure the vehicle is parked safely with the engine off.
Gather necessary tools: None required, just the vehicle's ignition key.

2. Access the Instrument Panel

Sit in the driver's seat and locate the instrument panel.
Identify the "Select/Reset" button on the instrument cluster.

3. Reset the Maintenance Light

Press and hold the "Select/Reset" button.
While holding the button, turn the ignition key to the "On" position (do not start the engine).
Keep holding the "Select/Reset" button until the maintenance light blinks, then release the button.
Turn the ignition off and then back on to verify that the maintenance light has been reset.