how to replace the wiper blades on Honda Civic 10th Generation (2016-2021)

Honda Civic 11th Generation (2022-Present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

441 words

Problem Statement

Learn how to replace wiper blades on Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms, diagnostic steps, and safety tips.

Affected Component

Body/Interior

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface and the ignition is off.

Symptoms

•Streaking or smearing on the windshield during use
•Wiper blades skipping across the glass
•Noisy operation of wipers
•Cracked or torn rubber on the wiper blades
•Reduced visibility during rain

Diagnostic Steps

1
Inspect the wiper blades for visible damage such as cracks or tears.
2
Test the wipers to check for proper operation and effectiveness in clearing the windshield.
3
Check the wiper arm attachment to ensure it is secure and functioning correctly.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Clean cloth

Parts Required

•New wiper blades (specific to Honda Civic 10th generation)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and materials:
- New wiper blades (specific to Honda Civic 10th generation)
- Clean cloth
Safety warning: Ensure the vehicle is parked on a level surface and the ignition is off.

2. Lift the Wiper Arms

Gently pull the wiper arms away from the windshield until they are in a vertical position.
Ensure that the arms are held securely to prevent them from snapping back onto the windshield.

3. Remove Old Wiper Blades

Locate the release tab on the wiper blade attachment.
Press the tab to release the blade from the wiper arm and slide the blade downward to remove it.
Repeat this process for the other wiper blade.

4. Install New Wiper Blades

Take the new wiper blade and align it with the wiper arm.
Slide the blade into the arm until you hear a click indicating it is securely attached.
Ensure the blade is oriented correctly for optimal performance.

5. Lower Wiper Arms

Carefully lower the wiper arms back onto the windshield.
Ensure they rest properly against the glass without any gaps.