how to fix my Honda Civic 10th Generation (2016-2021) that has no sound from speakers

Honda Civic 11th Generation (2022-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

545 words

Problem Statement

Learn how to diagnose and fix no sound from speakers in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shorts or shocks.

Symptoms

•No sound from any speakers
•Radio displays station but no audio output
•Bluetooth connections show as connected but produce no sound
•No sound when plugging in auxiliary devices
•Volume control appears functional but has no effect

Diagnostic Steps

1
Check the vehicle's audio settings to ensure the volume is turned up and the mute function is off.
2
Inspect the audio source (radio, Bluetooth, auxiliary) to confirm it is functioning properly.
3
Use an OBD-II scanner to check for any related error codes in the vehicle's electronic systems.
4
Inspect the fuses related to the audio system for any blown fuses.
5
Verify the speaker connections by removing door panels and checking wiring integrity.
6
Test the audio system with different sources to eliminate a source-specific issue.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Trim removal tools
•Multimeter
•OBD-II scanner

Parts Required

•Replacement fuses (if needed)
•Potentially new speakers or head unit

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the vehicle's audio settings to ensure the volume is turned up and the mute function is off.
2
Inspect the audio source (radio, Bluetooth, auxiliary) to confirm it is functioning properly.
3
Use an OBD-II scanner to check for any related error codes in the vehicle's electronic systems.
4
Inspect the fuses related to the audio system for any blown fuses.
5
Verify the speaker connections by removing door panels and checking wiring integrity.
6
Test the audio system with different sources to eliminate a source-specific issue.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative terminal of the battery to ensure safety.
Tools required: Socket set, trim removal tools, multimeter, OBD-II scanner.

2. Check Fuses

Locate the fuse box under the dashboard and check the audio system fuse.
- Remove the fuse cover and identify the audio system fuse (refer to the owner's manual).
- Use a multimeter to test for continuity in the fuse.
- If the fuse is blown, replace it with a fuse of the same amperage rating.

3. Inspect Wiring and Connections

Remove the door panels to access the speaker wires.
- Use trim removal tools to carefully detach the panels.
- Inspect the speaker wires for any signs of damage, disconnections, or corrosion.
- Ensure all connectors are securely fastened.

4. Test the Head Unit

Reconnect the battery and turn on the ignition.
If sound is still not present, use an OBD-II scanner to check for faults in the head unit.
- If no errors are found, consider disconnecting and reconnecting the head unit connectors to ensure a proper fit.
- Check the internal settings of the head unit for any audio output settings that may have been adjusted.

5. Replace Components if Necessary

If the issue persists, consider replacing the head unit or speakers.
- Follow manufacturer specifications for removal and installation.
- Ensure proper wiring connections are made during the installation process.