FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix Honda Civic 9th Generation (2012-2015) brake pedal going to floor - Honda Civic
Home/Cars/Honda/Civic/11th Generation (2022-Present)/how to fix Honda Civic 9th Generation (2012-2015) brake pedal going to floor

how to fix Honda Civic 9th Generation (2012-2015) brake pedal going to floor

Honda Civic 11th Generation (2022-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
critical
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
604 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the brake pedal going to the floor in Honda Civic 9th Generation (2012-2015). Step-by-step guide with symptoms and solutions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always wear safety glasses when working with brake fluid, as it can damage paint and surfaces.
  • •Ensure the vehicle is secured on jack stands if lifted for brake inspection.

Symptoms

  • •Brake pedal feels soft or spongy when pressed
  • •Brake warning light illuminated on the dashboard
  • •Reduced braking effectiveness or complete loss of brakes
  • •Fluid leakage under the vehicle, particularly near the wheels or master cylinder
  • •Unusual noises (grinding or squeaking) when brakes are applied

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Wrench set
  • •Brake fluid tester
  • •Brake bleeder kit
  • •Clear tubing and container (for bleeding brakes)
  • •Torque wrench (if applicable)

Parts Required

  • •Brake fluid (DOT 3 or DOT 4)
  • •Replacement brake lines (if damaged)
  • •Replacement master cylinder (if faulty)

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
critical
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the parking brake is engaged.
  • Wear safety glasses and gloves.
2. Address Low Brake Fluid
  • Sub-steps:
    • Open the hood and locate the master cylinder reservoir.
    • Check the fluid level; if low, fill it with the recommended brake fluid (DOT 3 or DOT 4).
    • Inspect the reservoir cap for proper sealing.
3. Inspect and Repair Leaks
  • Sub-steps:
    • Visually inspect the brake lines, calipers, and master cylinder for any signs of fluid leakage.
    • If leaks are found, replace damaged brake lines or seals.
    • Tighten any loose connections and ensure all fittings are secure.
4. Bleed the Brake System
  • Sub-steps:
    • Locate the bleeder valves on each brake caliper.
    • Use a brake bleeder kit or a clear tube and a container.
    • Start with the brake furthest from the master cylinder (usually the passenger-side rear).
    • Open the bleeder valve and have an assistant press the brake pedal several times.
    • Close the valve before the assistant releases the pedal.
    • Repeat this process for each brake in the following order: passenger rear, driver rear, passenger front, driver front.
    • Monitor fluid levels in the master cylinder during this process.
5. Check Master Cylinder Operation
  • Sub-steps:
    • If the pedal still goes to the floor after bleeding, inspect the master cylinder.
    • Remove the master cylinder from the brake booster.
    • Check for internal leaks by looking for signs of fluid seeping from the cylinder.
    • Replace the master cylinder if it shows signs of failure.
6. Reassemble and Test
  • Sub-steps:
    • Reinstall the master cylinder and ensure all connections are tight.
    • Refill the brake fluid reservoir to the full mark.
    • Test the brake pedal by pressing it; it should feel firm.
    • Take the vehicle for a slow test drive to ensure brakes are functioning correctly.

Tools Required:

  • Socket set
  • Wrench set
  • Brake fluid tester
  • Brake bleeder kit
  • Clear tubing and container (for bleeding brakes)
  • Torque wrench (if applicable)

Parts Required:

  • Brake fluid (DOT 3 or DOT 4)
  • Replacement brake lines (if damaged)
  • Replacement master cylinder (if faulty)

Estimated Repair Time: 2-4 hours

Safety Warnings:

  • Always wear safety glasses when working with brake fluid, as it can damage paint and surfaces.
  • Ensure the vehicle is secured on jack stands if lifted for brake inspection.